User manual CLARION MAX2256 INSTALLATION MANUAL

[. . . ] VISUAL/CD/CASSETTE CENTER UNIT WITH DUAL ACTION CENTRE VISUEL/CD/CASSETTE À DOUBLE ACTION UNIDAD CENTRAL VISUAL/DISCOS COMPACTOS/CASETES CON ACCIÓN DOBLE MAX2256 Owner's Guide & Installation Mode d'emploi et guide d'installation Guía del usuario y de instalación Clarion Co. , Ltd. Thank you for purchasing the Clarion MAX2256. K) Printed in Japan / Imprimé au Japon / Impreso en Japón QZ-2501B 280-6734-00 * Please read this Owner's Guide & Installation in its entirety before proceeding with wire connection and installation. * After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). If you sell the motor vehicle, please leave the manual in it so that the new owner can use it. [. . . ] 2) Press the Preset buttons 16 to 21 or the ENT button 11 to tune in to a station you want to store. When a beep sounds, the display turns to the ISR (Instant Station Recall) display and the frequency is stored. 4) Press the ISR button 24 to return to the previous mode. AM Frequency 530 to 1710 kHz 531 to 1629 kHz range Frequency 200 kHz spacing 50 kHz FM Frequency 87. 9 to 107. 9 MHz 87. 5 to 108 MHz range Changing area Depending on whether you use the unit in the U. S. or outside the U. S. , switch the area as follows: 1) Press the ADJ button 10 to go to the CONFIGURATION display. 2) Slide the Up/Down button 11 to (up) or (down) and move the cursor to "AREA. " 3) Slide the Up/Down button 11 to (right) to switch the area (between in the U. S. 4) Press the ADJ button 10 to return to the previous mode. Calling the station with the ISR button 1) In any mode, pressing the ISR button 24 allows you to tune in to the stored station. * The new setting returns to the initial setting. * When the ISR is functioning, the ISR display appears. * The default ISR setting is 87. 9 MHz. 18 Tape Mode Operations Loading and playing a cassette tape * When a cassette tape is already inserted (When the TAPE indicator 4 lights), press the FUNC button 12 and select tape mode. Playback starts automatically. CAUTION Do not place foreign objects in the Cassette Insertion slot or CD Insertion slot because it may cause breakdown. Be careful not to let your fingers get caught in the panel when it turns upward or downward. English 1) Press the TAPE button 1 . The operation panel turns downward and the Cassette Insertion slot 30 appears. 2) Insert a cassette tape into the Cassette Insertion slot 30 with the exposed side of the tape facing right. Playback starts automatically. Stopping (pausing) playback Owner's Guide Press (center) of the ENT button 11 . To resume playback, press (center) of the ENT button 11 again. * After a cassette tape is inserted, the operation panel closes. When the operation panel angle is stored, it is set to this angle automatically. Cassette Insertion slot 30 Fast-forwarding and rewinding 1) Slide the Up/Down button 11 to (right) to fast-forward the tape. When the end of the tape is reached, the other side of the tape is automatically played back. When the start of the tape is reached, that side is automatically played back. 2) When the BND button 13 is pressed at a desired track (song), fast-forwarding or rewinding is canceled and playback starts from that point. CAUTION Do not put your hand or fingers into the Cassette Insertion slot or CD Insertion slot, as this may cause a breakdown. Be careful not to let your fingers get caught in the panel when it turns upward or downward. Auto metal function When a metal or chrome tape is loaded, the unit detects the type of the tape and selects the most appropriate equalizer pattern. Ejecting the cassette tape Press the TAPE button 1 or Eject button 29 . After ejecting the cassette tape, the operation panel closes automatically. * MTL appears in the display. APC (Auto Program Control) 1) Slide the Up/Down button 11 to (left) twice to fast-forward the tape to the beginning of the current track. Slide the Up/Down button 11 to (right) twice to fast-forward the tape to the beginning of the next track. 2) When (center) of the ENT button 11 is pressed at a desired track, the APC is canceled and playback starts from that point. * When the panel angle is stored, it is set to this angle. * The operation panel can be closed by pressing the Close button 28 . Notes: · Do not leave a cassette tape in the ejected position (the operation panel is turned downward) because it may cause a breakdown. Be sure to remove the cassette tape or insert it and close the operation panel. [. . . ] (There is no sound produced. ) Wiring is incomplete. English Owner's Guide Sound quality is poor. The head is dirty. The Dolby NR button is not Turn the Dolby NR button on when listening to pressed. Nothing happens when Noise, etc. , is causing the mi- Press the reset button with the tip of a very buttons are pressed, or the croprocessor to malfunction. display is not accurate. Reset button Tip of a very fine instrument Picture is dark. BRIGHT (brightness) adjust- Select the CONFIGURATION display and adment is not appropriate. [. . . ]