User manual CLARION MS5500

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual CLARION MS5500. We hope that this CLARION MS5500 user guide will be useful to you.


CLARION MS5500 : Download the complete user guide (447 Ko)

You may also download the following manuals related to this product:

   CLARION MS5500 INSTALLATION MANUAL (940 ko)

Manual abstract: user guide CLARION MS5500

Detailed instructions for use are in the User's Guide.

[. . . ] This Ungo Security System was designed in the heart of California's high-tech "Silicon Valley" by Ungo Security Corporation, a subsidiary of Clarion Corporation. Since its founding in 1975, Ungo has been recognized as a pioneer and long time industry leader in vehicle security. Please read this manual thoroughly to familiarize yourself with your system's components and operation. Record the serial number of your Ungo system and keep all dealer records and receipts. [. . . ] · Once all doors are closed and the dome light is turned off, the LED will turn off. · The doors will lock. ** · The status LED will flash red, indicating the system is armed. The system is now armed. * The ignition must have been on for at least 4 seconds before the Passive Arming sequence will begin. ** If the Passive Locking feature is selected. To temporarily disable Passive Arming, you can turn the ignition key on then off, within 4 seconds. The status LED will stop flashing, and the system will not passively arm until the next time the key is on for more than 4 seconds. This feature is useful for turning off passive arming when refueling or washing your car or if you want to sit in your car and do not want the system to arm. Panic Mode Allows you to instantly trigger the alarm in an emergency situation by the Remote Transmitter. Press Button 1 again to stop Panic Mode. * If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and the system will return to its prior Armed/Disarmed state. *In Convenience Mode and Driver Door Priority Mode, Press Button 2 to stop Panic Mode. Emergency Override MS5500 Owner's Manual - Page 9 In case your Remote Transmitter becomes inoperable, or it is lost or stolen, you can still enter and drive your car by using the following procedure. Be sure that before you attempt this procedure you have your ignition key ready and that you know the location of the override switch. · Because the system is armed, the system will trigger and the siren will be sounding. You can now start and drive the car. Note: During installation, your installer can program the system to give a 10 second entry delay when the system Arms passively. When the door is opened while the system is Armed, the siren will give a series of warning chirps for 10 seconds before sounding, giving you time to perform the emergency override procedure. Automatic System Rearming This feature, which can be turned on during the installation, insures the security of the system by protecting your car in case of an accidental disarm. If your system becomes disarmed due to an accidental press of the Disarm Button, the system will automatically rearm if no other activity is detected within one minute. One minute after Remote Disarming, the system will alert you with a 10 second series of chirps, then arm. (If the Passive Door Locking feature is selected during the installation, the system will also relock the doors. ) Any of the following will cancel Automatic System Rearming: · Turn on the ignition. · Activate Auxiliary Function 1 or 2. Automatic System Rearming is independent of Passive Arming and only takes place if the system was Armed (actively or passively) for at least 20 seconds and then Disarmed by the Remote Transmitter. Full Time System Diagnostics The system continuously monitors all protected zones, even when it is not armed, and warns you if it detects a problem when you turn off the ignition. The status LED will flash to indicate the zone where the problem has been detected. 1 2 3 4 flash flashes flashes flashes = = = = door Logic Sensor II optional sensor hood / trunk * The system must see the zone open or active for at least 20 seconds before the zone is determined to be defective. This way, opening the car door before turning off the ignition will not cause the siren to emit the warning chirps. Page 10 - MS5500 Owner's Manual Other Features Valet Mode Allows you to temporarily disable the security system when the car is being serviced or turned over to a parking attendant. · The siren will chirp once to indicate you have turned Valet Mode on. · The siren will chirp twice to indicate you have turned Valet Mode off. While Valet Mode is on, you can continue to lock and unlock you doors with the Remote Transmitters, as well as operate the Auxiliary Functions. For added protection, when the doors are locked by the Remote Transmitter, the system's Starter Disable circuit will activate and the LED will emit double flashes until the system is unlocked by the Remote. If the Remote Transmitter is lost, stolen, or becomes inoperable while the car is locked in Valet Mode, you can use the Emergency Override procedure to deactivate the Starter Disable circuit. Ignition Controlled Door Locking For added convenience and safety, this feature automatically locks your car's doors 10 seconds after the ignition key is turned on. [. . . ] Ungo Security Systems carry a limited lifetime warranty on the Main unit (system brain) and transmitters. The warranty is limited to Ungo Security Systems that have been installed by an approved Ungo dealer and is extended to the Original Purchaser ("Owner") and to the original vehicle in which it was installed only, and is not transferable to any subsequent owner or owners of the product(s). All other products (including those products of other manufacturers which are supplied by Ungo Security as a part of, or an accessory to, an Ungo Security-manufactured product) are warranted by Ungo Security for a period of one year from the date of sale to the Owner. This warranty shall not cover: (I) any damage caused by Owner's negligence or misuse of any kind, or any damage due to causes unrelated to Ungo Security's manufacturing, including, but not limited to improper servicing or repair by someone other than Ungo Security or an authorized service facility: (II) alterations or modifications to the Ungo System other than the addition of an authorized accessory: or (III) improper installation or removal from the vehicle contrary to Ungo Security's instructions. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLARION MS5500




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual CLARION MS5500 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.