User manual CLARION OHM642

[. . . ] 6. 4" LCD Color Monitor OWNER'S MANUAL OHM642 INTRODUCTION The Clarion OHM642 is a full-featured 6. 4" LCD Color Monitor that can be used as a stand alone monitor, or can be integrated into a mobile multimedia system. The OHM642 has the following features: 6. 4" color LCD panel Universal Roof Mount Built-in IR Transmitter Built-in IR Eye Built-in Dome Lights RCA Composite Video Input Auto Signal Sensing ABOUT THE MANUAL AND WARRANTY To start enjoying your new Clarion monitor, please read the instructions listed in this manual. Please fill out and send in the enclosed warranty card to protect your purchase and aid in warranty service. [. . . ] The OHM642 can be used to enjoy video images with the Clarion video sources, even if no TV tuner is connected. PACKAGE CONTENTS 6. 4" monitor 5m long cable with 5 male connectors (A/V, Power/Ground, 3. 5m IR) Mounting Gasket Mounting Bracket Hardware Owner's Manual Warranty Card BUTTON AND CONNECTOR LOCATIONS 3 5 4 1 2 7 6 1 2 3 4 Dome Light Switch Monitor Release Button Picture Select Up Picture Select Down 5 6 7 IR Sensor Dome Light Connector 8 Pin DIN Pigtail OHM642 WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. Disconnect the negative (-) lead of the battery before making any power connections. When creating passage holes for the power wires, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit. When connecting the ground lead, fasten the ground lead (black) securely to a clean metal plate on the vehicle. Refer to the owner's manual of the connected device for information on audio output. INSTALLATION The OHM642 is an overhead, fold-down 6. 4" monitor with an Infrared (IR) eye. It will accept a video signal from any video source with composite video out. The IR eye will work directly with any Clarion video source product with an IR Eye Input. Once a location has been determined, connect the IR, A/V RCAs and power cables to the designated sources. Feed the cables through the hole in the mounting bracket and screw the bracket to the headliner. Mount the monitor with the provided hardware. 8 1 2 3 4 5 6 7 8 Pin DIN Mini Connector DC 12V IR Out DC 12V Ground Video Input A/V Signal Ground Audio R Input ACC Control Audio L Input POWER CONNECTOR IR REMOTE OUT AUDIO R INPUT AUDIO L INPUT VIDEO INPUT OWNER'S MANUAL MOUNTING OPTIONS The OHM642 is an overhead, fold-down 6. 4" monitor with an Infrared (IR) eye. [. . . ] Cleaning the LCD panel: Use a soft, dry cloth to gently wipe off any dust. The surface is easily scratched; do not rub it with hard objects. OHM642 SPECIFICATIONS GENERAL SPECIFICATIONS: Power Requirement: Power Consumption: Weight: Dimensions: Operation Temperature: Supplied Accessories: DC 12V (9-16V) 0. 8A Max. (1. 0kg) 9. 1" x 12. 7" x 1. 9" (230 x 322 x 48mm) (W x H x D) 41 - 104 degrees F Extension Cable with (male connectors A/V Input, Power Connector, 3. 5mm IR Remote Out), Mounting Gasket, Mounting Bracket, Screws MONITOR SPECIFICATIONS: Display Type: Screen Size: Pixels: Screen Resolution: Video System: Color TFT Active Matrix LCD 6. 4" (Actual Panel Size) 960 x 234 224, 640 Dots NTSC/PAL OWNER'S MANUAL NOTES: 661 West Redondo Beach Blvd. [. . . ]