User manual CLARION RAX650DZ

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones RAX650Dz AM/FMCASSETTEPLA YER WITHCD/MDCHANGERCONTROL · LECTEURDECASSETTEAM/FMAVEC COMMANDEDECHANGEURCD/MD · RADIODEAM/FMYREPRODUCTORDE CASETESCONCONTROLDECAMBIADORDE DISCOSCOMAPCTOS/MINIDISCOS OPEN T Clarion Co. , Ltd. 1998/11 (A·C) All Rights Reserved. Printed in China / Imprimé en Chine / Inpreso en China PE-1650B 280-7248-00 Thank you for purchasing the Clarion RAX650Dz. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). [. . . ] Close the FLIP DOWN PANEL. CAUTION . Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FILP DOWN PANEL does not open fully, gently open with your hand. · Do not put your hands, fingers or foreign objects into the cassette tape insertion slot. · When a tape has already been loaded in the cassette tape insertion slot, another one cannot be inserted into it. Never try to insert another tape forcibly. Switching to the other side of the tape Press PROG button @ to change tape direction and playback. The tape mechanism automatically reverses direction and engage playback at the end of the tape (auto reverse). Listening to a tape already inserted Press FNC button 3 to select the tape mode. If no tape is loaded in the unit, "NO CASS" appears in the display. Fast-forwarding/rewinding q FF(fast-forward): Press the right side of SEARCH button $. q Canceling FF/REW: Press Play/pause button 2. When the end of the tape is reached with FF/REW, the mechanism automatically reverses tape direction and resumes playback. If you select another mode during FF/REW, it is selected with FF/REW continued. The mechanism automatically makes FF/REW stop when the end of the tape is reached. This function is called "monitor mode". Pausing tape play 1. Press Play/pause button 2 again to resume tape playback. 14 RAX650Dz Tape Operations APC (Auto Program Control) function The APC function allows the tape to skip forward to the beginning of the next track or rewind to the start of the current track. q Skipping forward to the next track ("APCFF") During tape playback, press the right side of SEARCH button $ twice to fast-forward to the next track. q Skipping backwards to the start of the current track ("APC-REW") During tape playback, press the left side of SEARCH button $ twice to rewind to the start of the current track. q Canceling FF/REW APC to resume playback Press Play/pause button 2. If you select another mode during APC mode, it is selected with APC mode continued. The mechanism automatically makes APC mode stop when it finds the next track (in APC-FF) or the start of the current track (in APC-REW). "SCN" goes off from the display and the current track continues to play. When the end of the tape is reached during the intro tape scan, the tape mechanism automatically reverses direction and continues the intro tape scan. If you select another mode during the intro tape scan, the mechanism automatically makes the intro tape scan stop when it finds the next track (APC function). Tape selection repeat The tape selection repeat continuously plays the current track. "RPT" lights in the display and the current track is repeated. "RPT" goes off from the display and normal play resumes. Blank tape skip The blank tape skip allows you to skip blank sections of tape that are over 12 seconds long. "BLS" lights in the display and the mechanism fastforward to the next track selection. To cancel the blank tape skip, press and hold RPT button 6 for 1 second or longer again. Notes: The APC, intro tape scan, tape selection repeat and blank skip may not work properly with tapes of the following qualities: · Tapes on which the recording level is too low. [. . . ] Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of the Preset buttons 9 for 2 seconds or longer to store the current station to that preset memory. Auto store Auto store selects 6 TV stations automatically and stores each one into a preset memory. If there are not 6 stations with good reception, stations previously stored in memory remain and only the strong stations are stored into memory. RAX650Dz 21 9. (No sound is produced. ) No sound output when operating the unit with amplifiers or power antenna attached. [. . . ]