User manual CLARION VMA7191

[. . . ] 7" LCD Color Monitor OWNER'S MANUAL VMA7191 INTRODUCTION The Clarion VMA7191 is a full-featured 7" wide LCD Color Monitor that can be used as a stand alone monitor, or can be integrated into a mobile multimedia system. The VMA7191 has the following features: 7" wide-screen color LCD panel 2 RCA Composite Video Inputs Built-in IR Receiver Selectable Wide-Screen Format Video 1/Video 2 Select Button Perfect Fit into Clarion Console Monitor Housings and Headrest Mounting Brackets ABOUT THE MANUAL AND WARRANTY To start enjoying your new Clarion monitor, please read the instructions listed in this manual. [. . . ] The VMA7191 can be used to enjoy video images with the Clarion video sources, even if no TV tuner is connected. PACKAGE CONTENTS 7" monitor 5m long cable with 4 male connectors (Video 1, Video 2, Power/Ground, 3. 5m IR) Hardware (One 1/4-20 with nut and washer) BUTTON AND CONNECTOR LOCATIONS 1 7 2 8 9 3 10 6 12 11 4 5 1 2 3 4 5 Power Button IR Sensor Picture Control Button Wide Mode (16:9/4:3 Format) Source Button (Video 1/Video 2 Select) 8 Pin DIN Pigtail 7 8 9 Video 1 Input Video 2 Input Power Connector 10 IR Remote Out 11 Picture Select Up 12 Picture Select Down 6 VMA7191 WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. Disconnect the negative (-) lead of the battery before making any power connections. When creating passage holes for the power wires, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit. When connecting the ground lead, fasten the ground lead (black) securely to a clean metal plate on the vehicle. Refer to the owner's manual of the connected device for information on audio output. INSTALLATION The VMA7191 is a 7" monitor with an Infrared (IR) eye. It will accept a video signal from any video source with composite video out. The IR eye will work directly with any Clarion video source product with an IR Eye Input. Once a location has been determined, connect the IR, Video RCAs and power cables to the designated sources. [. . . ] SPECIFICATIONS GENERAL SPECIFICATIONS: Power Requirement: Power Consumption: Weight: Dimensions: Operation Temperature: Supplied Accessories: DC 12V (9-16V) 0. 8A Max. (0. 8A or Less) 1. 3lb (0. 6kg) 7-3/8" x 5-1/8" x 1" (188 x 130 x 36mm) (W x H x D) 41 - 104º F Extension Cable with (male connectors Video 1 Input, Video 2 Input, Power Connector, 3. 5mm IR Remote Out), Mounting Hardware Color TFT Active Matrix LCD 7" wide screen 1440 x 234 336, 960 Dots NTSC/PAL MONITOR SPECIFICATIONS: Display Type: Screen Size: Pixels: Screen Resolution: Video System: VMA7191 NOTES: OWNER'S MANUAL 661 West Redondo Beach Blvd. [. . . ]