User manual CLARION XDZ616

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones XDZ616 AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL · LECTEUR CD AM/FM AVEC COMMANDE DE CHANGEUR CD/MD · RADIO DE AM/FM Y REPRODUCTOR DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DISCOS COMPACTOS/MINIDISCOS Clarion Co. , Ltd. 2001/1 (D·C) All Rights Reserved. Printed in China / Imprimé en Chine / Inpreso en China PE-2398B 280-7628-00 Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). [. . . ] Press ADJ button 2 to return to the previous mode. AUX function This system has an external input jack so you can listen to sounds and music from external devices when connected to this unit. Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. Press and hold the ADJ button 2 for 1 second or longer to set Adjust mode. Turn the Rotary knob $ clockwise or counterclockwise as needed and select from "SENS HIGH", "SENS MID" or "SENS LOW". The factory default setting is "SENS MID". Message display When the unit is powered on or off, a message is displayed. The user can turn this message display ON or OFF. The factory default setting is "ON". 1. Press and hold ADJ button 2 for 1 second or longer to switch to the adjustment selection display. Press the right or left side of SEARCH button % to select "MESSAGE". 4. OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable, this unit controls all the CD changer functions. If 2 CD changers are connected, press FNC button 3 to select the CD changer for play. If "NO MAG" appears in the display, insert the magazine into the CD changer. "LOADING" appears in the display while the player loads (checks) the magazine. If "NO DISC" appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. Selecting a CD Each of the Direct button 8 corresponds to a disc loaded into the magazine. q Selecting a disc from 1 to 6 Press the corresponding Direct button 8 (1 to 6) to select the desired disc. q Selecting a disc from 7 to 12 (only when a 12 disc CD changer is used. ) Press and hold the corresponding Direct button 8 (7 to 12) for 1 second or longer to select the desired disc. If a CD is not loaded in a slot of the magazine, pressing the Direct button 8 corresponding to its disc number is invalid. CAUTION CD-ROM discs cannot be played in the CD changer. Selecting a track q Track-up 1. Press the right side of SEARCH button % to move ahead to the beginning of the next track. Each time you press the right side of SEARCH button %, the track advances ahead to the beginning of the next track. Press the left side of SEARCH button % to move back to the beginning of the current track. Press the left side of SEARCH button % twice to move to the beginning of the previous track. Pausing play 1. To resume play, press Play/pause button # again. Displaying CD titles This unit can display title data for CD-text CDs and user titles input with this unit. Each time you press and hold DISP button 0 for 1 second or longer, the title display changes in the following order: User title § Disc title § Artist name § Track title Note: · If the CD playing is not a CD-text CD or no user title has been input, "NO-TTL" appears in the display. q Scrolling a CD-text title When a CD-text title is longer than 11 characters, you can scroll the display as follows. The title scrolls. Fast-forward/fast-backward q Fast-forward Press and hold the right side of SEARCH button % for 1 second or longer. q Fast-backward Press and hold the left side of SEARCH button % for 1 second or longer. XDZ616 17 English CD Changer Operations Top function The top function plays from the first track (track No. [. . . ] For details on "PTY", refer to the section "RDS operation" of each owner's manual. During a TA, INFO, ALARM or PTY interrupt, turn the Rotary knob $ clockwise or counterclockwise to set the volume to a desired level (0 to 33). When the TA, INFO, ALARM or PTY interrupt ends, the volume returns to the level it had before the interrupt. 28 XDZ616 DVD operation DVD deck control When an optional DVD deck (sold separately) is connected through the CeNET cable, this unit controls some DVD deck functions. Adjust the volume Turning the Rotary Knob $ clockwise increases the volume; turning it counterclockwise decreases the volume. Other operations refer to DVD deck's owner's manual. XDZ616 29 English 9. (No sound is produced. ) No sound output when operating the unit with amplifiers or power antenna attached. [. . . ]