User manual CLARION XMA1

[. . . ] Play / Pause (s) Button MUTE Button @ SRCH (Search) Left and Right (a and d) Button # A-M (Audio Mode) Button LOUD (Loudness) Button $ BAND Button PROG(Program) Button MAG (Magazine) Button % D (Display) Button ¥ ISR (Instant Station Recall) Button & Z (Z-enhancer) Button XMA1 3 5. WIRED REMOTE CONTROL UNIT OPERATIONS s XMA1 following operations are enabled by remote control with the Wired Remote Control Unit M101RC (sold separately). WIRED REMOTE CONTROL UNIT 1 PWR (Power) Button FUNC (Function) Button 2 VOLUME Up (w) / Down (z) Bbuttons ] 3 BAND Button [ PROG (Program) Button [ ] DISC Up Button [ ] 4 Play/Pause (s) Button [ MUTE Button [ ] ] Buttons 5 SEARCH Up( ) / Down ( ) Buttons ] : In Radio Mode [ [ ] : In Tape Mode [ ] : In CD Changer Mode CAUTION Be careful about adjusting the volume, as turning on the power while the volume is raised to its maximum may harm your hearing. PWR / FUNC Button 1 Turning on and off the power Press the PWR button 1 to turn the power on and press and hold it for 1 second or longer to turn the power off. Changing the operation mode Each time the FUNC button 1 is pressed, the mode switches in the following order: Radio Tape CD changer Play/Pause ( s) / MUTE Button 4 Pause (in Tape mode or CD changer mode) Press the Play/Pause button 4. To cancel, press the MUTE button 4 again. SEARCH Up ( Notes: · If the above equipment is not connected, corresponding mode cannot be selected. · In tape mode, if no cassette tape is loaded in XMA1, "CASS" flashes on the display and the radio mode is selected. ) / Down ( ) Buttons 5 Fast-Forwarding and Rewinding (In Tape mode) Press SEARCH Up button 5 to fast-forward the tape. [. . . ] Switching the Display Press the DISP button % to enter the clock display mode. Operation mode display Clock display Operation mode display Adjusting the Bass 1) Press A-M button # and select "BASS". 2) Press volume button 1 w to emphasizes the bass; press z to attenuates the bass. The factory default setting is "0". (Adjustment range: ­6 to +6) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. XMA1 5 Setting the Clock 1) Press the DISP button % to enter the clock display mode. This enables clock editing. The editable fields will be indicated by flash. 3) To move between the hour and minute fields, use the SRCH Left (hour) and Right (minute) buttons @. 4) To confirm the clock setting, press the DISP button %. Notes: · If you select another operation mode before completing the above procedure, the clock setting operation will be canceled. · Removing the battery for a check or repair causes the clock to be reset. Set the clock again in such a case. Tape Operation Loading Tapes Open the door by push up the hook. Switching to the Other Side of the Tape Press the PROG button $. Playback is switched to the other side of the cassette tape. FF Scan Function (Intro Music Scan) When the SCN button 6 is pressed, "SCN" appears on the display, and the first 10 seconds of all the tracks on the cassette tape are played. Press the SCN button again to stop scanning. Repeat Function (Repeat Play) Insert the cassette tape into the Cassette insertion slot with the side on which the tape is exposed facing the right. Playback starts automatically. The metal tape setting is set automatically when a metal or chrome tape is loaded. When the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically. When the RPT button 7 is pressed, "RPT" appears on the display and the current track is played repeatedly. Press the RPT button again to cancel the repeat mode. Blank Skip Function Use this function to automatically skip to the beginning of the next recorded section when there is a blank section of 12 seconds or more on the tape. When the BLS button 7 is pressed for 1 second or longer, the blank skip mode is set and "BLS" appears on the display. Press the BLS button 7 again for 1 second or longer to cancel the blank skip mode. Listening to a tape which is already loaded Press the FUNC button 2 to select the tape mode. Playback begins automatically. Stopping Playback Temporarily Press the Play/Pause button !. The "BAND" changes as follows each time the "BAND" button is pressed: FM1 FM2 FM3 AM FM1 3) Use the Preset buttons 5 to select the desired station. Mute Use this function to turn off the sound immediately. Press the MUTE button again to cancel the mute mode. Area Change Function Use this to listen to the radio outside of the United States. Switchable frequency spacing This boat stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U. S. When using the unit outside the U. S. , use the following procedure to switch the frequency steps and frequency range: 1) Turn the power on and set the tuner mode. 2) Keep the "BAND" button $ pressed and while pressing the button, press the SRCH Left button @. This procedure changes the factory setting to 9 kHz steps for AM and 50 kHz steps for FM, the standard calibrations for countries other than the U. S. 2) While pressing the "BAND" button $, press the SRCH Right button @. [. . . ] Display is not accurate. Microprocessor has malfunctioned due to noise, etc. This unit is equipped with a number of self-diagnosis functions to protect the system. If a problem should occur, the user is warned through various error displays. Error Display Cause The cassette tape does not play normally due to tape cut. The mode detection switch is not normally activated due to mechanism failure. [. . . ]