User manual CONCORD 4060 FAQ

[. . . ] Concord Eye-Q 4060AF I am having difficulties installing the camera driver and software. If you encounter this issue, please uninstall the driver completely and restart you computer. [. . . ] If you find that some of your pictures are overexposed, please try the following. There may not have been enough distance between the camera and the subject. Move the camera so there is at least 1m (3. 3ft) between the camera and the subject. You can adjust the exposure compensation by following the directions below: 1. Press the OK button to save your selection. Concord Eye-Q 4060AF Why do the images on my LCD appear blurry? Your camera comes with a protective film that covers the LCD. If this film is not peeled off, images will appear blurry and foggy on the LCD. If you continue to see blurry images on the LCD, it may be that the camera was moved during picture taking or the subject was out of the defined focus range. Please hold the camera steady while taking the picture and make sure there is at least 1 m (3. 3 ft. ) between the camera and the subject. When using the macro mode feature, the distance between the camera and the subject is at least 20 cm (0. 66ft. ). How can I get better battery performance for my digital camera? · When power is in short supply, it is best to avoid the camera functions that consume the most power. [. . . ] Note: Rechargeable batteries often get up to two times as many shots on a fresh charge. Concord Eye-Q 4060AF After taking a picture or two, my camera suddenly turns off. The camera has a built-in power saving feature that turns the camera off after 30 seconds of inactivity (default setting) to conserve battery power. [. . . ]