User manual CURTIS HTIB 1000

[. . . ] Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the product case through product openings. Damage Requiring Service - Unplug this product from the wall outlet and take it to qualified service personnel under the following conditions. b) If liquid has been spilled into, or objects have fallen into the product. d) If the product does not operate when used according to the operating instructions. [. . . ] d) If the product does not operate when used according to the operating instructions. Servicing - The user should not attempt to service the product beyond that described in the operating instruction. All servicing should be referred to qualified service personnel. CAUTION Invisible laser radiation will be emitted when the product is open and interlocks are defeated. USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE PROCEDURE HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. 3 Power Supply Operating the player on AC power Insert one end at the supplied power cord to the AC IN Jack located at the rear Of the rear of the unit and the other end into the Wall outlet. NOTE: WHEN THE FIRST TIME USED THE CORD HAS TO BE FIRMLY PUSHED INTO THE SOCKET IF IT DOES NOT WORK ON AC, TO TRY AGAIN TO BE SURE FOR A POSITIVE CONNECTION. To play your unit on batteries, the AC power cord must be disconnected From the player. Unplug the AC power cord from the unit and insert eight size C/UM-2 Batteries (not provided) in the compartment. If the unit is not to be used for sometime or is being run exclusively on AC electrical current, remove batteries from the battery compartment to avoid leakage. 8. CASSETTE EJECT BUTTON CASSETTE STOP BUTTON CASSETTE FAST-FORWARD BUTTON CASSETTE REWIND BUTTON CASSETTE PLAY BUTTON CASSETTE REC BUTTON CD REPEAT BUTTON CD RANDOM BUTTON 17. Slide the BAND selector to a desired setting ­ AM/ FM ST. /FM MONO 3. Repeat steps 1 to 2 to select and store all desired tracks in this way. To play your program, press PLAY/PAUSE. 2. Reviewing your set program · In the STOP mode, press PROG. Erasing a program You can erase the contents of the memory by: ­ opening the CD door; ­ select to RADIO source; ­ pressing STOP (twice during playback or in the stop Position) The display shows your stored track numbers in sequence. HEADPHONE Your radio is equipped with a HEADPHONE JACK for private listening. Simply plug any 3. 5 mm plug type stereo headphone into the HEADPHONE JACK. With the headphone connected the speaker in the radio will be automatically disconnected. CASSETTE OPERATION Installation of Cassette Open the cassette cover by pressing the "EJECT" BUTTON. Automatic Stop (Auto Stop) When the cassette being played or recorded on reaches the end of the tape, the unit will shut off. Fast Forwarding and Rewind Press the "F. FWD" button to fast forward the tape or "REW" button to rewind the tape. Press the "STOP" button to stop the moving tape at the desired location. [. . . ] Fast Forwarding and Rewind Press the "F. FWD" button to fast forward the tape or "REW" button to rewind the tape. Press the "STOP" button to stop the moving tape at the desired location. The full reel or spool section to be used for recording should be on the right side. 8 2. Press the CD PLAY/PAUSE Button, then select the CD track number to be recorded. [. . . ]