User manual CURTIS IP210

[. . . ] Setting UP Selecting language mode and area code: To select the language for displaying the message, follow the instructions below: 1. Press "MODE" Button until "STORE" appears on the LCD. Press "REDIAL" once, "ENG SPA FRA" appears on the LCD. [. . . ] After select the language mode, the unit will display "YES NO DIAL +1". Press "MODE" Button to end this procedure. If you want to select a new language mode, press the "RESET" to restart the setting up procedure. Choosing Tone or Pulse dialing For the telephone to work correctly, you must set it to the type of your dialing system: Tone or Pulse dialing Set the DIAL MODE switch to: "Tone" if your dialing system is Tone. Using touch ­ Tone services with Pulse dialing system Some services require you to use touch Tone. If your phone uses Pulse dialing, however, you need to follow the steps below to use these services. Adjust the ringer On/Off For privacy, you can set the RINGER switch to [OFF]. The ringer will not sound, but the caller will continue to hear the ringing. "OUT OF AREA" or "PRIVATE" data is also counted as one call. Erasing data from the Caller ID list The phone maintains the data of the last 55 calls in memory. If there is a new call after those 55 calls, the oldest number will be automatically erased and the new call will be stored. Calling back a number from the Call ID list You can easily call back a number from the Call ID list by pressing the SPEED DIAL buttons. Storing numbers into the one-touch dialing button from the Caller ID list You can store the CALL ID data into the one-touch dialing memory. Press [MODE] button, the cursor will blink on the left top of the display 3. Press the memory (M1-M3) or AUTO button first, then enter the desire location from 1-0 and "*", "#" key you want this name and number to be stored in. [. . . ] Press [MODE] button, the cursor will blink on the left top of the display 3. Press the memory (M1-M3) or AUTO button first, then enter the desire location from 1-0 and "*", "#" key you want this name and number to be stored in. Using the visual message waiting service If you subscribe to your telephone company's message service which includes this feature the display will show that you have message waiting to be retrieved. [. . . ]