User manual CURTIS LCD1988

[. . . ] 1 TABLE OF CONTENTS SAFETY PRECAUTONS-------------------------------------------------------------------1 IMPORTANT SAFETY INSTRUCTIONS-----------------------------------------------1 OSD MANUAL -------------------------------------------------------------------------------2 REMOTE CONTROLLER -------------------------------------------------------------------2 llustration of the keys on the remote control ------------------------------------------3 Menu picture------------------------------------------------------------------------------------4 Input mode PC---- -------------------------------------------------------------------------------4 Input mode AV / S-Video---------------------------------------------------------------------6 Input mode TV----------------------------------------------------------------------------------- 10 CONNECT PERIPHERAL EQUIPMENT ---------------------------------------------------13 Production Specifications -------------------------------------------------------------------14 Maintaining your TV-----------------------------------------------------------------------------15 Troubleshooting----------------------------------------------------------------------------------16 2 IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK) TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The graphic symbols on the back cover of the set mean the following: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the Presence of uninsulated"dangerous Voltage "within the product"s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is iintended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE APPARATUS SHALL NOT BE EXPOSED TO DRIP PING OR SPLANSHING AND THAT NO OBJECTS FILLED WITH LIQUIDS SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. INSTALLATINO LOCATE the receiver in the room where direct light does not srike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. soft and indirect lighting is recommended for comfortable viewing. [. . . ] BLUE SCREEN: set the background color when the no signal, while on, it will show blue, while off , it will show white NOISE REDUCE: reduction:Reduce the noise of the picture, provide clearer picture. IMAGE SETTING VIDEO ADVANCE OSD SETTING LANGUAGE:you may select one language from English or french OSD . H: adjust the position of osd menu to left or right OSD . V: adjust the position of osd menu to up or down 7 SOUND SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE Input mode s-video 1 2 3 4 Press"Select" button to enter to display the S-VIDEO, press "menu"to display s-video menu Press "+"/ "-" to scroll through the parameters Press "Menu" to enter , then press "+"/"-"_to make changes the value of the parameters. Press the "Select" button to exit the menu. S-VIDEO MAIN MENU 8 Name submenu of Picture of submenu Instructions 1Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2Contrast: Adjust the contrast of the picture, the image becomes higher as the number increases. 5Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases. BLUE SCREEN: set the background color when the no signal, while on, it will show blue, while off , it will show white NOISE REDUCE: reduction:Reduce the noise of the picture, provide clearer picture. IMAGE SETTING VIDEO ADVANCE 9 Name of submenu Picture of submenu OSD SETTING Instructions LANGUAGE:you may select one language from English or french OSD . H: adjust the position of osd menu to left or right OSD . V: adjust the position of osd menu to up or down SOUND SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE Input mode :TV 1 Press "Select" button to enter to display the TV , press "menu"to display TV menu 2 Press "+"/ "-" to scroll through the parameters 3 Press "Menu" to enter , then press "+"/"-"_to make changes the value of the parameters. 4 Press the "Select" button to exit the menu TV MAIN MENU: 10 Name submenu of Picture of submenu Instructions 1Brightness : Adjust the brightness of the picture, the image becomes brighter as the number increases. 2Contrast: Adjust the contrast of the picture, the image becomes higher as the number increases. 5Sharpness: Adjust the amount of detail enhancement, the image sharpness rises as the number increases. 3:SKIP THIS:if you want to skip a channel, you may turn it on, then this channel will be skiped next time IMAGE SETTING TV SETTING 4:AUTO FINE:Auto adjust the tune of picture 5:FINE TUNE: If the image received is not very good, you can press PRO to select Fine Tuning item in 6: AUTO SEARCH: Auto search and save the channel BLUE SCREEN: set the background color when the no signal, while on, it will show blue, while off , it will show white NOISE REDUCE: reduction:Reduce the noise of the picture, provide clearer picture. VIDEO ADVANCE 11 Name of submenu Picture of submenu OSD SETTING Instructions LANGUAGE:you may select one language from English or french OSD . H: adjust the position of osd menu to left or right OSD . V: adjust the position of osd menu to up or down SOUND SETTING TREBLE:adjust the treble sound BASS: adjust the bass BALANCE: Adjust the balance of the audio output from left to right. MUTE: turn off/on sound VOLUME: adjust the value of sound Return the value of default RESET Select input signal: PC-RGB/AV/S-VIDEO/TV INPUT SOURCE 12 CONNECTION AND PREPARATION Remove the back plate at the back of the TV as shown on the illustration opposite. Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution not to damage the screen. AV/ R AV/ L V IDIO S- V IDIO AUDIO AUDIO IN P UT V GA DC TUNE R 4567 8 9 1 23 1 2 3 4 5 6 7 8 9 TUNER AUDIO AUDIO IN PUT AV / L AV / R VIDEO S- VIDEO VGA DC 13 Production Specifications: Cell Type Active size Display Area Panel spec resolution Pixel Pitch Brightness / Contrast Viewing Angle(L/R/U/D) Response Time Color System Sound System Progressive Scanning Color Tint Control Digital Comb Filter Speaker Output(RMS) Blue Background On-off Sound STERO Plug &Play Remote control TV Antenna S-Video in A/V(Composite) in PC (VGA) In PC Audio In Audio Out On working Stand By Color active matrix TFT (Thin-Film-Transistor) LCD panel 19 inch 405(h) x 255 (v) MM 1440(H)X900(V) 0. 285 x 0. 285 300 nit/ 700:1 75/75/75/60 8ms NTSC. M YES YES YES 2X3W YES YES YES YES YES YES YES YES YES YES YES <50W <5W TV System Picture Sound Features Terminal Power Consumption Accessories Net weight Gross weight Remote control/ user manual /3-color cable/ adapter /power cord, /VGA cable/Audio cable 3. 5kg 5kg Original size 525(L)x195(w)x390(H) 14 Maintaining Your TV Periodically cleaning the exterior of your TV can reduce the chance of dust being collected which can block the ventilation holes; hence, prolonging the life of your TV. Unplug the power Unplug the LCD TV from the wall outlet before cleaning the TV. Avoiding water and liquid Never spray or pour any liquid directly onto the screen or case. [. . . ] Try to pull them further apart. 18 When there are stripes on the screen or colors fade. Is the unit receiving interference from other devices? Transmission antennas of radio broadcasting station and transmission antennas of amateur radio and cellular phones may also cause interference. Use the units as far apart as possible from device that may cause possible interference. 19 [. . . ]