User manual CURTIS NS-C2116

[. . . ] Invisible laser radiation is present when the case is opened or the interlocks are defeated. Use of any controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Surge Protectors: We recommend that you use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for this product. Caution Caution: Your CD player/radio should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on it. Important safeguards · · · · · Read instructions­ Read all the safety and operating instructions before operating your CD player. [. . . ] Turn to tune to desired radio station Press to select sound source - AM/FM ST/CD / button button BUZZER/MUSIC switch AUTO/OFF/ON switch TUNING knob FUNCTION selector www. insignia-products. com 9 Insignia NS-C2116 Stereo Radio, CD Player, Alarm Clock Setting up your CD player Using AC power To use AC power: 1 Make sure that your local AC power source matches the voltage shown on the plate located inside the battery compartment (120 V 60 Hz). 2 Connect the power cord to the AC connector on the CD player, then plug it into the AC wall outlet. The CD player is not compatible with CD-ROM, CDI, VCD, DVD, or computer CDs. Note · If a disc is inserted incorrectly, is dirty or damaged, it will not play. · To prevent damage to the disc, never open the CD compartment while the disc is spinning. · The CD player should only be used on a steady surface. www. insignia-products. com 11 Insignia NS-C2116 Stereo Radio, CD Player, Alarm Clock To use the CD player: 1 Slide the AUTO/ON/OFF switch to the ON position. 3 Open the CD compartment by pressing the OPEN/CLOSE spot on the top of the player. 4 Insert a CD, CD-R, or CD-RW disc, with the printed side up, onto the spindle, then close the CD compartment. 7 Press the STOP button to stop the CD playback. Selecting a different track To select a different track on a CD: 1 While a CD is playing, press the SKIP Up button once for the next track, or press repeatedly until the track you want appears on the display. 2 Press the SKIP Down button once to return to the beginning of the current track, or press repeatedly to go to a previous track until the track you want appears on the display. 3 If you selected a track while the CD is stopped or paused, press PLAY/PAUSE / to begin playback. Locating a specific passage To locate a specific passage within a track: 1 While a CD is playing, press and hold the SKIP Up or SKIP Down button. 2 When you reach the passage you want, release the button and normal playback resumes. 12 www. insignia-products. com Insignia NS-C2116 Stereo Radio, CD Player, Alarm Clock Using Repeat mode To use Repeat mode to repeat a single track: 1 Press the REPEAT button once. 2 Press the PLAY/PAUSE / button to begin playback, then press the SKIP Up or SKIP Down button to select the track to repeat. 3 Press the STOP button to stop the CD playback. To use Repeat mode to repeat an entire CD: 1 Press the REPEAT button twice. 4 Press the STOP button to stop the CD playback. Using Random mode To randomly playback the tracks on a CD: 1 Press the RANDOM button once. 2 Press the RANDOM button again to cancel Random mode and return to normal playback. The PLAY/RAND indicator lights. Using the alarm clock To set the clock: 1 Press and hold the CLOCK SET button. 2 Press the HOUR button repeatedly until the current hour is shown on the display (or press and hold the button to advance the hours rapidly). Note When setting the hour, make sure the PM indicator is on when the hour is PM and off when the hour is AM. 3 Press the MIN (minute) button repeatedly until the current minute is shown on the display (or press and hold the button to advance the minutes rapidly). 4 When the correct time is shown on the display, release the CLOCK SET button. www. insignia-products. com 13 Insignia NS-C2116 Stereo Radio, CD Player, Alarm Clock To set the alarm: 1 Press and hold the ALARM SET button. 2 Press the HOUR button repeatedly until the correct hour is shown on the display (or press and hold the button to advance the hours rapidly). Note When setting the hour, make sure the PM indicator is on when the alarm it to be set for PM and off when the alarm is to be set for AM. 3 Press the MIN (minute) button repeatedly until the correct minute is shown on the display (or press and hold the button to advance the minutes rapidly). 4 When the correct time is shown on the display, release the ALARM SET button. To set the alarm to wake to the buzzer: 1 Set the alarm time by following the instructions in "To set the alarm:" on page 14. [. . . ] · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio or TV technician for help. Copyright © 2006 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ]