User manual CURTIS SRS36

[. . . ] 9 Preparing for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Placing Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Receiving Calls with the HANDSET on the BASE UNIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Receiving Calls with the HANDSET off the BASE UNIT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For best performance, clean the CHARGE TERMINALS periodically with a damp cloth. CHARGE/IN USE LED Indicator: (CHARGE) Lights up when the HANDSET is placed on the BASE UNIT for charging. (IN USE) Lights up to indicate that the HANDSET is in TALK mode. 6 Getting Started Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. If there is any visible damage, do not attempt to operate this equipment. Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE CORD, BELT CLIP, and Owner's Manual. 58 GHz 58 GHz In Use Low Batt. Cordless Phone PAGE REDIAL PAUSE CH VOL MUTE BELT CLIP BATTERY PACK MEMO FLASH TALK ABC DEF 1 GHI 2 JKL 3 MNO 4 PRS 5 TUV 6 WXY 7 8 OPER 9 # chg/ in use * 0 HANDSET BASE UNIT TELEPHONE LINE CORD AC ADAPTOR 3. Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the back of the BASE UNIT. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the back of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place you purchased your telephone. ) 6. 120V WALL TELEPHONE POWER-IN OUTLET JACK CONNECTION JACK TELEPHONE LINE CONNECTION JACK TONE/PULSE SELECT SWITCH AC ADAPTOR TELEPHONE LINE CORD 7 Getting Started 7. If you want to access tone dialing mode, press the Temporary Tone (*) button on the HANDSET and dial the desired number, subsequent digits will be dialed into Tone mode. Pulse mode will reset after the HANDSET is returned on-hook. 11 Cordless Telephone Operation Mute Function 1. The microphone will be muted and the other party will not hear any voice/ talking from your end. Press the MUTE button again to continue your phone coversation with the other party. CH In Use Low Batt. REDIAL PAUSE VOL MUTE 1, 2 MEMO FLASH TALK Using the Headset Feature Your telephone can utilize a headset (not included) to be connected to your HANDSET for you to enjoy hands-free communication. Insert the small plug on the end of the headset into the HEADSET JACK at the left side of the HANDSET. Follow the procedures discussed in "Receiving Calls" and "Placing Calls" to receive and place a call. NOTE: When you plug the headset plug into the HEADSET JACK it automatically mutes the MICROPHONE and SPEAKER of the HANDSET. The HEADSET JACK is compatible with 2. 5 mm headset plugs only. HEADSET MICROPHONE SPEAKER HEADSET HEADSET PLUG (2. 5mm) HEADSET JACK 12 Security System Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and the HANDSET. Security Code This telephone has an internal security code with 65, 536 possible combinations. Resetting Security Code and Channel Information Communication between the HANDSET and the BASE UNIT may not be possible in any of the following situations: 1. To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds. Multi-Channel Access Your cordless telephone lets you select a channel from the 40 frequencies available to transmit signals between the BASE UNIT and the HANDSET. When you notice interference from other cordless telephones, change to another channel by pressing the CH (CHANNEL) button on the HANDSET. 13 Recharging the BATTERY PACK Recharging the BATTERY PACK The nickel metal hydride (Ni-MH) BATTERY PACK in the HANDSET can be recharged many times using the built-in charger in the BASE UNIT. [. . . ] Cordless telephones must not cause interference to any licensed radio service. 16 FCC Requirements FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. A label on the BASE UNIT of this equipment contains, among other information, the ACTA Product Number and the Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company. The REN is also useful in determining the quantity of devices that you may connect to your telephone line and still allow these devices to ring when your telephone number is called. [. . . ]