User manual CURTIS TCR4964

[. . . ] When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on apparatus. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. [. . . ] Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Do not stick paper or write anything with a ballpoint pen on the label side of the disc. LOADING AND UNLOADING COMPACT DISCS LOADING AND UNLOADING COMPACT DISCS m Press the Standy/on/Alarm/off button to turn the unit on. m Press the right side of the CD door, labelled PUSH OPEN/CLOSE to open the CD compartment. m When the disc compartment has opened, insert the disc with the label side facing up. When the compartment is fully closed, the disc will start turning automatically. m The disc compartment may be opened at any time by first pressing the stop button and then pressing the PUSH OPEN/CLOSE. CAUTION Do not put anything except a compact disc into the compartment. Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism. If the disc is correctly loaded, the total number of tracks on the disc will be displayed: 6 Notes:After the disc compartment is fully closed, the disc information may not appear on the display. This means that the disc is improperly loaded (most likely it is upside down). To check, open the disc compartment again and reload the disc. DISC PLAY m Insert a CD as described in the previous section and close the disc compartment. To skip backward or forward through the tracks on the disc, press the or buttons. m When CD is playing or on the stop, the display will appear TIME instead of CD track number and time. If you want to display the CD track number and time, press CD DISPLAY button. Notes: - If the disc is deeply scratched, or too dirty, disc play may not start. If an improperly centred disc is played, noise can be heard in the mechanism. - If the disc is inserted incorrectly, or the disc is damaged the display will show No disc. DISC ERRORS This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. [. . . ] . ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer s instructions. . always consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO NOT. . . obstruct the necessary all-round ventilation especially DON T stand the set close to curtains or on soft furnishing such as carpets. Overheating can cause unnecessary damage and shorten the life of the set. [. . . ]