User manual DALL IKON
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DALL IKON. We hope that this DALL IKON user guide will be useful to you.
Manual abstract: user guide DALL IKON
Detailed instructions for use are in the User's Guide.
[. . . ] 951006-0-0 C
IKON
®
manual
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE BACK PANEL. REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated , , dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1. 8.
Read Instructions - All the safety and operating instructions should be read before the appliance is operated. [. . . ] Ideally, the distance from the listening position to each loudspeaker should be the same as the distance between the left and right loudspeakers (Figure 7). In a surround installation, the speakers should be placed in a symmetrical configuration (Figure 8).
Figure 7. Surround setup
8
Placement of IKON Vokal
The IKON VOKAL center speakers have been specially designed to be positioned close to the large surface of the TV screen - and can be placed either above or below the screen, as required. Whether you position the center speaker above or below your TV, we recommend having the front of the speaker in line with the front of the TV. We recommend fitting the enclosed rubber feet to ensure a stable, vibration-free setup.
Figure 9. Placement below TV-screen
9
Wall-mounting the IKON 1 & IKON On Wall
DALI IKON 1 There are several placement options for DALI IKON 1: on a stand, on a shelf, on a table-top or wall-mounting. For the best possible sound, we recommend placement with the tweeter module at roughly the same height as your ears when you are seated in your favourite listening position. For wall-mounting of DALI IKON 1, use the builtin bracket on the speaker's rear panel. Mount the included rubber feet on the rear of the speaker to avoid scuffing the wall and to ensure secure mounting. You must make certain that the screw can bear the weight of the speaker as stated in the technical specifications. The diameter of the screw head should be 8 - 10 mm and the diameter of the screw should be max. Because the loudspeaker can be positioned four different ways, there are four brackets on the rear panel. If used as center loudspeaker, it can be placed above or below the TVscreen. For wall-mounting, follow the instructions above for DALI IKON 1.
Figure 12. Wall-mounting IKON 1
On the rear panel of DALI IKON ON WALL, there are four indentations to make room for loudspeaker cable between the speaker and the wall. This allows you to run cable along either side up or down depending on what works best for you.
10
Connection
Correct, tight connections to your amplifier are extremely important for your listening experience. Before connecting cables or changing any connections, ALWAYS turn off your amplifier.
Make sure that the conductors are tightly gripped by the terminals with no loose wires that could cause a short circuit and damage the amplifier (Figure 14). If the LFE input terminal is selected, the crossover network in IKON SUB is not active. The LFE input terminal should therefore only be used together with a special subwoofer output terminal in which the signal has already been filtered, so the subwoofer only receives the lowest frequencies.
Figure 17. Connection to surround amplifier with separate subwoofer output
SURROUND AMPLIFIER
LFE/Subwoofer LINE OUT
13
Connection to a stereo pre-amplifier
If you want to use IKON SUB to supplement the bass reproduction of a stereo system, connect the subwoofer "Line in, Left/Right" to a stereo signal on the pre-amplifier with full frequency content. The built-in crossover network in IKON SUB then ensures that the subwoofer only reproduces the lowest frequencies (see section on level adjustment and adjusting the crossover on page 15 and 16). It is possible as a no-compromise stereo solution, or for reproduction of very powerful sound pressure in a surround setup in large rooms, to use two IKON SUBs. [. . . ] Once you are happy with the positioning of your speakers, it is important to ensure that they are completely stable. For floor models it is essential that you use the accompanying spikes.
17
Power and acoustic pressure
How loud a speaker is able to play and still sound good is completely dependent on the signal it has to reproduce. So, in practice, you cannot define an unequivocal level for use in comparing different speakers.
in the system. So, DALI recommends that the tone controls generally be set to the neutral position, and you achieve your desired sound image through correct positioning of the speakers. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DALL IKON
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DALL IKON will begin.