User manual DENON RC 1242

[. . . ] Accessories Inserting the battery Operating range of the remote control unit features Part names and functions Sound bar Subwoofer Remote control unit 5 Enjoying television, movies and music Pairing a Bluetooth device for the first time Listening to music with a paired Bluetooth device Turning off the sound temporarily Incompatible with the ARC / TV equipped with an optical digital connector Connection 3: TV equipped with an HDMI connector and incompatible with the ARC / TV equipped with an analog connector Automatically setting to standby (Auto standby function) Reducing the standby power consumption (Deep standby function) Operating this unit using the remote control of a TV Power does not turn on / Power is turned off Operations cannot be performed through the remote control unit 32 No sound comes out The HDMI Control function does not work Music from the Chromecast cuts out or delays sometimes Thank you for purchasing this Denon product. To ensure proper operation, please read this owner's manual carefully before using the product. accessories Check that the following parts are supplied with the product. 1 Slide the rear cover off the remote control unit in the arrow direction. [. . . ] 0 If streaming operations are performed with a Chromecast-enabled music app while this unit is in standby mode, this unit will turn on automatically. Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. Can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Pairing a Bluetooth device for the first time Pair a Bluetooth device with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. The status display LED blinks in blue when this unit is in pairing mode. 4 Select "DHT-S416" (Default) from the list of devices displayed on the screen of the Bluetooth device. The status display LED lights up in blue and this device and the Bluetooth device are paired. 5 Select "DHT-S416" (Default) from the list of devices displayed on the screen of the Bluetooth device. The status display LED lights up in blue and this device and the Bluetooth device are paired. When a 9th Bluetooth device is paired, it will be registered in place of the oldest registered device. Listening to music with a paired Bluetooth device 1 Press c to turn on power to the unit. 3 Activate the Bluetooth settings on your Bluetooth The status display LED lights up in blue and connects to the last Bluetooth device connected. The status display LEDs change to the volume display when these buttons are pressed. Each time a volume button is pressed, the volume LEDs blink and the number of LEDs that are blinking increases or decreases according to the volume that is set. The volume LEDs blink three times when the maximum or minimum volume is reached. The number of LEDs that are blinking increases or decreases according to the subwoofer volume that is set. The volume LEDs blink three times when the maximum or minimum subwoofer volume is reached. When the button is pressed, the rightmost status display LED flashes and the listening mode changes. Compresses the dynamic range (difference between loud and soft sounds) to make audio easier to hear at low volumes. Turning off the sound temporarily This device is loaded with a volume limiter function which limits excessive output. If volume is above 18 when the power is off, the volume is set to 18 the next time power is turned on. [. . . ] Select this unit from the list of devices displayed on the screen of the Bluetooth device. 0 Turn the power of the Bluetooth device off and on again, and then try again. 0 To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN devices and other Bluetooth devices. The HDMI Control function does not work The HDMI Control function does not work. [. . . ]