User manual DENON UTU-110

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. [. . . ] Se till att det finns möjlighet till god värmeavledning vid montering i ett rack. Keep the unit free from l'installation sur une étagère. We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN55013, EN55020. This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal. This product and the supplied accessories, excluding the batteries, constitute the applicable product according to the WEEE directive. Note that the illustrations in these instructions may differ from the actual unit for explanation purposes. When connecting the speakers to an amplifier, be sure to read the amplifier's owner's manual carefully and connect properly. Connect the input terminals on the rear panel of the speaker with the speaker output terminals on the amplifier, using the included speaker cables. Connect the speaker for the left channel to the "L" terminal on the amplifier, the speaker for the right channel to the "R" terminal on the amplifier, making sure to check the polarities ("+" and "­"). Check the owner's manual of the amplifier you are using for details. Be sure to turn the amplifier's power off before connecting the speakers to the amplifier. If the polarities are inverted, the phase may be off and the sound may have no bass component, making it seem unnatural. [. . . ] Be sure to turn the amplifier's power off before connecting the speakers to the amplifier. If the polarities are inverted, the phase may be off and the sound may have no bass component, making it seem unnatural. The 1 Peel off the sheath from the tip of the speaker cable, then firmly twist wires by hand so that they do not stick out and cause short-circuits. [. . . ]