User manual DINO POWER DP-6390

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DINO POWER DP-6390. We hope that this DINO POWER DP-6390 user guide will be useful to you.


DINO POWER DP-6390 : Download the complete user guide (211 Ko)

Manual abstract: user guide DINO POWER DP-6390

Detailed instructions for use are in the User's Guide.

[. . . ] If the air source is far away from the airless pump, the diameters of the inlet hoses shouldn't be less than 25mm. Also to confirm every airway hose and valve connector clean to connect the air source hoses. Firstly to connect the high pressure paint hose, swivel nipple and spray gun tightly, then with the paint outlet of the main unit. [. . . ] When the load resistance of the airless pump is balanced with the pulls of the air motor, the cycle of hydraulic pump can be stopped gradually and the spray can be started. When the spray is not smooth or the spray width is transformed, there must be something blocked in the tip. To spray the blocks only by revolving the switch tip counterclockwise 180°. When it's hard to revolve the switch tip, firstly to loose the tip connection nut to release the pressure of the gun body, then to spray the blocks only by revolving the switch tip counterclockwise 180°. After the painting, firstly to exhaust the painting completely, then put the suction hose into the solvent barrel to cycle the pump until the pump become clean. To twist the paint hose and spray gun on the main unit in order not to be damaged. TROUBLE AND MAINTENANCE The general troubles can be into two kinds: air system and painting hydraulic system Air system troubles: 1. To check if the air source is connected or not and the pressure regulation valve is turned on or not. 2. Air motor works abnormally. To check the air source (0. 3MPa-0. 6MPa), the pressure regulation valve can be regulated right. And to check the spring of manifold is effective or not, and O ring in the valve is sealed tightly or not 3. Air motor sounds abnormally, insufficient pressure and bad The seals of cylinder and manifold, valve and plate are atomization. To check the exhaust system (spray gun and paint hose) to be blocked or not. To check the connection nut is loose or not. Painting hydraulic system troubles: 1. If the air motor cycles normally, the exhaust of paintings is not normal. Please check the painting barrel whether the barrel is empty or not, and check all the exhaust system and filtering net whether they are blocked or not. And check whether the V gasket in the painting pump is loose or worn seriously. After the exhaust valve and the spray gun are closed, the air motor still cycles due to the following troubles: a. [. . . ] If the high pressure painting injected the skin, please go to the professional hospital for cure. The spark can cause the fire and explosion, the fire is forbidden in the painting area. This airless pump must be grounded during the usage to avoid the static electricity. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DINO POWER DP-6390




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DINO POWER DP-6390 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.