User manual ECHO SRM-230S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ECHO SRM-230S. We hope that this ECHO SRM-230S user guide will be useful to you.
You may also download the following manuals related to this product:
ECHO SRM-230S (1509 ko)
ECHO SRM-230S (1514 ko)
ECHO SRM-230S 10-04 (481 ko)
ECHO SRM-230S 10-04 (487 ko)
ECHO SRM-230S 10-05 (791 ko)
ECHO SRM-230S 10-05 (769 ko)
ECHO SRM-230S 11-03 (499 ko)
ECHO SRM-230S 12-08 (953 ko)
ECHO SRM-230S 12-08 (902 ko)
ECHO SRM-230S 11-03 SERIAL NUMBER 07001001-07001732 (490 ko)
ECHO SRM-230S 10-04 (485 ko)
ECHO SRM-230S 10-05 (717 ko)
ECHO SRM-230S 12-08 (901 ko)
ECHO SRM-230S 11-03 SERIAL NUMBER 05001001-05014429 (502 ko)
ECHO SRM-230S 11-03 SERIAL NUMBER 07001001-07001732 (497 ko)
Manual abstract: user guide ECHO SRM-230S
Detailed instructions for use are in the User's Guide.
[. . . ] Grass Trimmer/Brush Cutter
Operator's Manual MODEL SRM - 230 SRM - 230S
Read rules for safe operation and instructions carefully. Both must be read and understood for proper and safe operation.
WARNING
X7532098204
X753002744 12/10
2
IntroductIon
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. [. . . ] Tools Required: 200-250 mm (8 -10 in. ) length of wire with one end bent into a hook, clean rag, funnel, and an approved fuel container. Parts Required: REPOWERTM AIR & FUEL FILTER KIT.
Fuel is VERy flammable. Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank. Use the "fuel line hook" to pull the fuel line and filter from the tank. Remove the filter from the line and install the new filter.
DANGER
20
spark plug
Level 2. Parts Required: REPOWERTM Tune-Up Kit IMPORTANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) otherwise severe engine damage may occur. Remove spark plug and check for fouling, worn and rounded center electrode. Tools Required: 4 mm Hex Wrench, cleaning brush, 25 or 50 mm (1 or 2 in. ) Parts Required: None if you are careful.
IMPORTANT To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. Overheating and engine seizure can occur when: · Air intakes are blocked, preventing cooling air from reaching the cylinder. This build up insulates the engine and prevents the heat from leaving. Removal of cooling passage blockages or cleaning of cooling fins is considered "Normal Maintenance. " Any failure attributed to lack of maintenance is not warranted.
Grass Trimmer/Brush CuTTer OperaTOr's manual
1. Remove engine cover (C).
C
21
IMPORTANT DO NOT use a metal scraper to remove dirt from the cylinder fins. Use brush to remove dirt from the cylinder fins.
B
A
6.
Remove grass and leaves from the grid between the recoil starter and fuel tank. Assemble components in reverse order.
7.
eXhaust system Spark Arrestor Screen
Level 2. Tools Required: Cross Head Screwdriver, Soft Metal Brush, 4 mm Hex Wrench Parts Required: Spark Arrestor Screen, Gasket 1. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering cylinder. Remove spark arrestor screen cover (B), gasket (C) and screen (D) from muffler body.
B C D A
22
5. NOTE When cleaning carbon deposit, be careful not to damage the catalylic element inside muffler. Assemble components in reverse order.
B C D A
Exhaust Port Cleaning
Level 2. Tools required: 4mm Hex Wrench, Wood or plastic scraper
Parts Required: As needed: Heat Shield
1. 3.
Remove spark plug lead from spark plug, and remove muffler cover (2 screws). Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port. [. . . ] You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted. Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ECHO SRM-230S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ECHO SRM-230S will begin.