User manual EDIROL P-10

[. . . ] Thank you and congratulations on your choice of the Edirol P-10 visual sampler. Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p. These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of all of your new unit's features, you should read the Owner's manual in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2008 ROLAND CORPORATION All rights reserved. [. . . ] Parameter Name Movie File Play Mode Start Frame End Frame Audio Sync Additional Audio File Audio Level Reverse Sw Strobe Sw Strobe Time Description Change the movie assigned to a pad. 45 1. Press the [EXIT] button while pressing the [PAD PARAM] button. Rotate the [VALUE] knob to select "Execute. " 2. D05_04. eps Still Image Pad Parameters 3. You cannot return the P-10 to its state prior to changing the settings after performing the following operations: · Turning the power off (p. 63) from the MENU screen You can specify the following parameters for still images. Parameter Name Still Image File Additional Audio File Audio Level Effect Sw Slide Show Set Slide Show User Set Strobe Time Description Add and exchange still images assigned to a pad. 47 42 Changing the Pad Parameters Movies Changing a Movie Assigned to a Pad 1. Select the PAD which has the movie you want to change assigned to it. Pads that have movies assigned to them light up red. Changing the Play Mode (Play Mode) Specify the play mode according to how you want to play back a movie. Play Mode Description 05PAD_ForwardLoop. eps Forward Loop Repeats playback. 05PAD_AltermateLoop. eps 2. Press the [PAD PARAM] button. Button_PADPARAM. eps Alternate Loop Repeats playback alternating between forward and reverse play back. 05PAD_Oneshot1. eps 3. Rotate the [VALUE] knob to select "Movie File, " and then press the [ENTER] button. The FILE SELECT screen appears. One Shot1 Plays the movie file once and then stops, leaving the last frame displayed. 05PAD_Oneshot. eps D05_05. eps One Shot2 Plays the movie file once and then stops, leaving the screen blank. 05PAD_Gate1. eps 4. Rotate the [VALUE] knob to select the movie that you want to assign, and then press the [ENTER] button. You cannot assign a movie to a pad that already has still images assigned to it. If you want to do this, first delete the pad data, and then assign the movie. When you release the pad, playback pauses and the last frame is displayed. Press the pad again to resume playback. 05PAD_Gate2. eps 1 Gate2 Plays the movie as long as you hold the pad. When you release the pad, playback pauses and the screen is left blank. Press the pad again to resume playback. 43 Changing the Pad Parameters Specifying the Playback Range (Start Frame/End Frame) Specify the range of the movie that you want to play back. D05_StartEnd_e. eps Syncing a Movie with Audio (Audio Sync) When you apply speed, repeat, and reverse effects to a movie, you can specify whether to apply the same changes to the audio. Setting ON OFF Description Change audio at the same time to match the movie. When you turn the [SPEED] knob all the way to the left, the movie and audio playback both pause. 00m00s00f Start Frame (00m30s00f) End Frame (02m10s07f) Playback 1. Rotate the [VALUE] knob to select "Start Frame" on the PAD PARAMETER screen, and then press the [ENTER] button. The Start Frame screen appears. Specifying an Audio File (Additional Audio File) You can specify a separate audio file to play back with a movie. To specify an audio file, make sure you add audio files to the SD card beforehand. 2. Rotate the [VALUE] knob to select the first frame that you want to play back. Press the [ENTER] button. You are returned to the PAD PARAMETER screen. 3. 1. 4. Rotate the [VALUE] knob to select "End Frame. " The End Frame screen appears. Rotate the [VALUE] knob to select "Additional Audio File" on the PAD PARAMETER screen, and then press the [ENTER] button. Press the [ENTER] button. If there are no audio files saved to the SD card, no audio files are displayed. If you have specified an audio file for a movie that already has audio, the movie audio doesn't play back. 2. 3. 5. Rotate the [VALUE] knob to select the last frame that you want to play back. Press the [ENTER] button. You are returned to the PAD PARAMETER screen. [. . . ] 23 System Settings . . . . . . . . . . . . . . . . . . . . . . . . . 55 62 62 30 61 61 60 O Output Fade Color L/R . . . . . . . . . . . . . . . . . . 15, 30, Rx Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S Safety Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 55 16 63 67 63 17 67 67 67 16 30 47 47 60 28 58 58 61 61 49 44 59 45 35 58 28 36 46 46 29 34 42 30 47 47 46 31 47 Supported Format . . . . . . . . . . . . . . . . . . . . . . System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 46 45 31 61 61 47 23 52 55 55 52 P P-10 Image Converter . . . . . . . . . . . . . . . . . . . . [. . . ]