User manual EMTEC S800

[. . . ] Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 1 Preface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 2 Packing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1. 3 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] MANUAL SCAN In MANUAL SCAN mode, you can select the CH name, Bandwidth, and Input Frequency. Use the navigational and numerical buttons on the remote control to select or input. Channel Set Select to edit channel information. Press the up / down button to select DVB-T, and press the enter button to confirm. In this menu, you can edit the Name, and sequence for the DVB-T TV channels. Use the navigational buttons to select and modify the settings, 35 / 84 and press the enter button to confirm. You can also press the red button to select Default, and press the blue button to select Sort. 7. 2 Changing Analog TV settings (only for S800) Press the left / right button on the remote control to select the ATV tab from the menu bar. Analog TV Region Select to set the region for Analog TV. Press the up / down button to select, and the enter button to confirm. Channel Scan Select to scan for available Analog TV channels. Press the up / down button to select from AUTO SCAN, and press the enter button to confirm. 36 / 84 In this menu, the system will automatically scan for available Analog TV channels. Channel Set Select to edit channel information. Press the up / down button to select Analog TV. In this menu, you can edit the Status, Name, Fine Tune, TV System, and sequence for the Analog TV channels. Use the navigational buttons to select and modify the settings, and press the enter button to confirm. 7. 3 Changing Video Settings Press the left / right button on the remote control to select the Video tab from the menu bar. 37 / 84 Aspect Ratio Select to set aspect ratio. Press the up / down button to select from Pan Scan 4:3, Letter Box 4:3, or 16:9. Press the enter button to confirm. Pan Scan 4:3: Display a wide picture on the entire screen and cuts off the redundant portions. Select when a standard 4:3 TV is connected. Letter Box 4:3: Display a wide picture with two black borders on the top and bottom of 4:3 screen. Select when a standard 4:3 TV is connected. 16:9: Compress the image to convert the whole image. Brightness Select to set brightness levels. Press the up / down button to adjust brightness. Press the enter button to confirm. 38 / 84 Contrast Select to set contrast levels. Press the up / down button to adjust contrast. TV System Select to adjust TV system. Press the up / down button to set the TV system, depending on your viewing preferences. Press the enter button to confirm. 7. 4 Changing Audio Settings Press the left / right button on the remote control to select the Audio tab from the menu bar. Night Mode Select to set night mode. 39 / 84 Press the up / down button to select from Off, On, and Comfort. Digital Output Select to set Digital Output (S/PDIF) mode. Press the up / down button to select from RAW, and LPCM. Press the enter button to confirm. 7. 5 Changing Record Settings Press the left / right button on the remote control to select the Record tab from the menu bar. 40 / 84 Quality Select to set the default recording quality setting. Press the up / down button to select the quality setting you require. The highest quality setting is HQ which requires the most storage space. The other settings reduce recording quality sequentially but also require less storage space. Auto Chapter Select to add chapter marks automatically at set intervals. Press the up / down button to select the interval you require. An automatic chapter mark will be added at each interval, allowing you browse titles easily after recording. Permanent Timeshift Select to set Time Shift mode. Press the up / down button to select from On and Off. [. . . ] Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by 82 / 84 court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. [. . . ]