Detailed instructions for use are in the User's Guide.
[. . . ] User's Manual
NT-Manager
16Channel
Please read this manual thoroughly before use, and keep it handy for future reference. Design and specifications are subject to change without notice.
Table of Contents
1. Introduction of Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Preparations before operating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. 1 Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. 2 Installing NT-Manager Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. 3 Network Device IP Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. 3. 1 IP setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2. 3. 2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. [. . . ] Up to four videos can be played at one time and the videos can be observed in the 1-screen or 4, 8, 11, 16-screen split mode, or in the full screen mode. You can easily move to the desired time position using the record information bar.
18
-Make Clip File 1. *Click "Estimation" button, eVideoClient show video clip file size.
Run screens of ClipViewer. Save: Current screen save to image file.
20
5. 4. 5 System log
This shows important events occurring during the program operation in real-time. Up to 1000 system logs can be saved, and old-dated logs are deleted from the program automatically.
5. 4. 6 Camera status
Alarm Event Alarm Event status When an alarm input event occurs, the alarm icon, located at upper right of the screen, blinks for the time period set in the network device setting. *Refer to `7. 1. 4 Alarm Setup', `7. 1. 5 Event Setup' for details on the Alarm, Event setting. Motion Event Motion Event status When a motion event occurs, the motion icon, located at upper right of the screen, blinks for the time period set in the network device setting. *Refer to `7. 1. 3 Motion Setup' for details on the motion setting. Recording Recording on/off status In order to save the real-time observation video to PC, press the recording button. The realtime observation video current shown is recorded and saved to PC. For the method of recording, search and playback, please see the `6 Record/Search/Replay Video. '
21
Audio Control Microphone on/off status Speaker on/off status If users are to control the volume of a microphone and speaker connected to a user PC, they should adjust the user PC volume regardless of the microphone and speaker volume control set in Network Devices. · Full Down Menu
Check this item when showing control panel. The control panel to hidden, Uncheck the button once again.
5. 5 Program information
Click this item to see program information. · Toolbar · Full Down Menu
22
5. 6 Program Exit
Click this item to see program Exit. Record
Record an image under real-time monitoring to the HDD of users PC.
6. 1 Manual Recording
When clicking the recording button during the real-time observation, the color turns to red and the recording starts. When pressing the recording button again, this recording process will stop. · Toolbar
· Full Down Menu
· On Screen
23
6. 2 Motion Event Recording
If a motion event occurs, it can be recorded automatically through this setting process. For motion event recording, execute the motion event setting (See the"7. 1. 3 Motion Setup"), and try the record setting (See the "7. 1. 9 Record Setup").
6. 2 Alarm Event Recording
If an alarm event occurs, it can be recorded automatically through this setting process. For alarm event recording, execute the alarm event setting (See the "7. 1. 4 Alarm Setup"), and try the record setting (See the "7. 1. 9 Record Setup"). · Record Mode
Overwrite record mode
Record once mode
Before recording, check the remaining amount and the recording course and the overwrite item of the hard disk. Setup
7. 1 Setting up Network Device
Currently the setup window which corresponds to the network equipment which is connected appears. · On Screen · Setup Window (pop up)
24
7. 1. 1 Video Setup
Image Appearance
Resolution It enables users to determine a basic screen size when having an access through the Web Browser or PC program. [. . . ] Check Box: When the record file is full, show message.
Language
Language options are: English, French, German, Spanish, Russian, Japanese and Italian.
OSD
Enable OSD Text Check this item when showing an information of Network Device name and channel number etc. 47
7. 2. 4 System3 Setup
Popup window
When the event occurs in popup window shows. Set up NT-Manager Client to sound when events are detected by selecting events from the list and designating the sound file (. wav) path. Select event type Alarm and Motion.
48
7. 2. 5 Favorite Setup
Favorite
The Favorite is a user-defined connection list that combines more than one remote site, so multiple sites can be monitored at the same time with a single connection. [. . . ]