User manual FUJIFILM FINEPIX 2400

[. . . ] OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix2400 ZOOM correctly. Please follow the instructions carefully. BB11660-200 (1) Warning For customers in the U. S. A. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] G Press the "BACK" button to exit the menu display. Formatting erases all of the data on the SmartMedia. cancel single frame erase, all-frame erase or media formatting, press the "BACK" button. G If "1" or "7" is displayed, reset the respective settings. 49 PLAYBACK MENU g SETTING AND REMOVING SINGLE FRAME PROTECTION 2 1 G G 3 4 G Press the "MENU/ OK" button to display the menu on the LCD monitor. Use the "d " or "c " button to select "g PROTECT ". Use the "a b " button to select "FRAME SET/RESET". Press the "MENU/OK" button. Use the "d" or "c" button to select the image to be protected. When the "MENU/ OK" button is pressed, the image is protected and the "h" icon appears on the right of the screen. To remove the protection, press the "MENU/OK" button again. 4 50 "PROTECT" is a setting that prevents images from being accidentally erased. However, the FORMAT function erases all stored images, including protected images (P. 48). !G Press the "BACK" button to cancel the protection process and return to the menu. To exit the menu, press the "BACK" button again. To protect another image, repeat the procedure from step 3 . 51 PLAYBACK MENU g SETTING AND REMOVING PROTECTION FOR ALL FRAMES 2 1 G G 3 G Press the "MENU/ OK" button to display the menu on the LCD monitor. Use the "d " or "c " button to select "g PROTECT". Use the "ab" button to select "PROTECT ALL" or "UNPROTECT ALL". Press "MENU/OK" button. A confirmation screen will appear to proceed, press the "MENU/OK" button. 4 !G Press the "BACK" button to cancel the protection process and return to the menu. To exit the menu, press the "BACK" button again. 52 Formatting erases all images, including protected images (P. 48). 53 PLAYBACK MENU , HOW TO SPECIFY PRINT OPTIONS 1 PLAYBACK MENU R DPOF DATE SETTING With the FinePix2400 ZOOM, you can order prints using the Digital Print Order Format (DPOF). You can use the DPOF to specify the following: G The frames to be printed and the number of prints for each frame G Imprinting of the date and time This section gives a detailed description of how to order your prints with the FinePix2400 ZOOM. Note that some printers do not support date and time imprinting or specification of the number of prints. Note that the warnings shown below may be displayed while you are specifying the prints. (P. 75) If you load a SmartMedia that contains frames specified for printing on another camera, those print specifications are all reset and replaced by the new print specifications. (P. 75) G G G 2 G G This function allows you to select whether or not the date of shooting is included on the print. Press the "MENU/ OK" button to display the menu on the LCD monitor. Press "d c" buttons to select "RDPOF". Select "TDATE". Press "d" or "c" button to specify "DATE ON" or "DATE OFF". This setting is then valid for all the prints until the setting is changed. 4 54 No more than 999 prints can be specified on the same SmartMedia. !G Before specifying any other settings, first specify whether date is to be shown or not. 55 PLAYBACK MENU R DPOF SET/RESET FRAME 1 G G 2 G G 3 4 Use the "ab " button to select "FRAME SET/ RESET". [. . . ] Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. If water or a foreign object has entered the camera, switch the camera off and then remove the batteries and disconnect the AC power adapter. This can cause a fire or electric shock. WARNING Never attempt to modify or disassemble the camera. (Never open the casing. ) Do not use the camera when it has been dropped or the casing is damaged. [. . . ]