User manual FUJIFILM FINEPIX F401

[. . . ] This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix F401 correctly. Please follow the instructions carefully. BL00156-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Pressing the "MENU/OK" button erases all the unprotected files. Pressing the "MENU/OK" button erases all the files and initializes the SmartMedia. Remove the protection. If the "©" "ø" message appears, press the "MENU/OK" button once more to erase the image. !G If the "", "", "å" or "" message appears, refer to P. 97, 98 before formatting the SmartMedia and take the appropriate measures. 61 PLAYBACK MENU k PROTECTING IMAGES FRAME/ALL 2 0 1 1 0 2 3 UNPROTECT ALL Removes the protection from all the files. PROTECT ALL Protects all the files. 2Press the "MENU/OK" button to view the menu screen. 1 0 2 0 FRAME SET/RESET Protects or unprotects only the selected file. Use "d" or "c" to select "k" PROTECT. 1Press "P(a)" or "{(b)" to select "UNPROTECT ALL", "PROTECT ALL" or "FRAME SET/ RESET". 2Press "MENU/OK" button to confirm your selection. 4 62 Protection is a setting that prevents images from being accidentally erased. However, "FORMAT" erases all images, regardless of a "PROTECT ALL" setting (P. 61). Continued on next page. . . 63 PLAYBACK MENU k PROTECTING IMAGES FRAME/ALL PROTECT ALL UNPROTECT ALL FRAME SET/RESET 1 2 1 0 2 0 4 1 Press "d " or "c " to select the file to be protected. 2 Press the "MENU/OK" button to protect the file currently displayed. Press the "MENU/OK" button to unprotect all the files. 64 65 PLAYBACK MENU i HOW TO SPECIFY PRINT OPTIONS (DPOF) 1 PLAYBACK MENU i DPOF SET FRAME 1 0 2 0 DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as SmartMedia. The recorded specifications include information on which frames are to be printed. This section gives a detailed description of how to order your prints with the FinePix F401. On the FinePix F401, you can specify only one print per image in the DPOF settings. Note that some printers do not support date and time imprinting or specification of the number of prints. Note that the warnings shown below may be displayed while you are specifying the prints. 2 © ø (P. 60) When you erase the image, the DPOF setting for that image is deleted at the same time. 1Set the Mode switch to "Q". 2Press the "MENU/OK" button to display the menu screen. ¥ (P. 70) If you load a SmartMedia that contains frames specified for printing on another camera, those print specifications are all reset and replaced by the new print specifications. Use "g" to select "i" DPOF. 4 TM (P. 99) Up to 999 frames can be specified on the same SmartMedia. 66 Continued on next page. . . 67 PLAYBACK MENU i DPOF SET FRAME 3 4 5 3 1 0 2 0 6 1 0 2 0 1 0 2 0 1Press "P(a)" or "{(b)" to select "DDATE". 2Use "d" and "c" to select "DATE ON" or "DATE OFF". The selected setting is then valid for all frames with DPOF settings. 1Press "P(a)" to select "OK". 2Press the "MENU/OK" button. 1 Use "d" or "c" to display the frame for which you want to specify DPOF settings. 2 Press "P(a)" or "{(b)" to set "YES" for the frame to be printed and then press the "MENU/OK" button or "c". To specify more DPOF settings, repeat steps 1 and 2. When you have finished the settings, always select "FINISH" and press the "MENU/OK" button. If you press the "BACK" button, no DPOF settings are specified. 4 !Note also that you can specify prints for up to 999 frames on the same SmartMedia. 68 ! [. . . ] h Contact with other metallic objects or batteries could cause the batteries to ignite or burst. Do not use the charger to charge batteries other than those specified here. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the batteries to leak fluid, overheat or burst. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. WARNING CAUTION This icon indicates that death or serious injury can result if the information is ignored. This icon indicates that personal injury or material damage can result if the information is ignored. Never attempt to take pictures while in motion. [. . . ]