User manual FUJIFILM FINEPIX S5PRO

[. . . ] Getting Ready Using the Camera Advanced Features · Photography · Playback OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S5 Pro correctly. Please follow the instructions carefully. Settings Camera Connection Software Installation Appendices Troubleshooting BL00577-200(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Please read the Safety Notes (p. 238) and make sure you understand them before using the camera. Perchlorate Material-special handling may apply, See http://www. dtsc. ca. gov/hazardouswaste/ perchlorate. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Pressing MENU/OK cancels all of the DPOF settings already specified for each frame (file). · Prints of up to 999 frames (files) can be ordered on the same memory card. · DPOF settings cannot be specified for CCD-RAW data. CAUTION · Pressing DISP/BACK while choosing settings will cancel all current settings. If there were previous DPOF settings, only the modifications are canceled. · When selecting the [WITH DATE E] setting, the date is imprinted on your shots using the print service or a DPOF-compatible printer (depending on the printer specifications, the date may not be printed in some cases). · Images photographed with a camera other than FinePix S5 Pro may not be specified DPOF settings. Continued Q 129 PLAYBACK MENU Setting the menu (p. 126) RESET ALL To cancel all DPOF settings: RESET DPOF OK? YES CANCEL Select [RESET ALL] in the [PLAY BACK MENU] (p. 128). MEMO 100-0001 MASTER MIN MAX u appears on the screen during playback when the image has specified DPOF settings. 130 Setting the menu (p. 126) Z u PRINT ORDER (DPOF) DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as a memory card. The recorded specifications include information on which frames are to be printed. *Some printers do not support date and time imprinting or specification of the number of prints. *The warnings shown below may appear while specifying the prints. Advanced Features -- Playback "DPOF SPECIFIED. ERASE ALL OK ?" (p. 127) When erasing the image, the DPOF setting for that image is deleted at the same time. "RESET DPOF OK ?" (p. 129) When inserting an memory card that contains images specified for printing by another camera, those print specifications are all reset and replaced by the new print specifications. [DPOF FILE ERROR] (p. 215) Up to 999 images can be specified on the same memory card. MEMO When [ON] is set for the [QUICK PREVIEW DATA] under [ SHOOTING] in the [SET UP] menu, images may not print properly. 131 PLAYBACK MENU Setting the menu (p. 126) Protecting the images ( PROTECT) Use this mode to prevent frames (files) from being accidentally erased. IT MAY TAKE A WHILE FRAME SET / RESET To protect or unprotect only the selected frame (file): PROTECT OK?YES CANCEL Press MENU/OK to protect all the frames (files). RESET ALL YES CANCEL YES CANCEL RESET ALL OK?IT MAY TAKE A WHILE Unprotected Protected (F displayed) A Press p or q to select the protecting/ unprotecting frame (file). B Press MENU/OK to protect/unprotect the currently displayed frame (file). Unprotected: protecting frame (file) Protected: unprotecting frame (file) To protect another frame (file), repeat steps A and B. When protecting frames (files) is completed, press DISP/ BACK. YES CANCEL Press MENU/OK to unprotect all the frames (files). 132 Setting the menu (p. 126) MEMO To stop the procedure midway Setting automatic playback ( SLIDE SHOW) Use this mode to playback photographed images continuously. You can select type of image transition. PLAYBACK MENU CANCEL NORMAL NORMAL FADE-IN SLIDE SHOW FADE-IN LCD BRIGHTNESS MULTIPLE CROPPING ERASE Advanced Features -- Playback If the images are very large, protecting or unprotecting all the frames (files) may take some time. If you want to take a picture during the procedure, press DISP/BACK. CAUTION Formatting the memory card erases all the frames (files), including protected frames (files) (p. 179). MEMO · To interrupt automatic playback, press MENU/OK. · Press p or q to advance or go back through the images when selecting [NORMAL] and [FADE-IN]. [. . . ] These actions could damage the cord and cause a fire or electric shock. This can result in you falling down or being involved in a traffic accident. This can cause an electric shock due to induced current from the lightning discharge. Load the battery as aligned with the indicator. WARNING Do not heat, change or take apart the battery. [. . . ]