User manual FUJIFILM FINEPIX 50I

[. . . ] Getting Ready Basic Photography Advanced Features Photography Advanced Features Playback Music Remote Controller 26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan Printed on recycled paper. FGS-103106-FG This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix50i correctly. Please follow the instructions carefully. Settings 7 Printed in Japan BL00041-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can use the DPOF to specify the following : G The frames to be printed and the number of prints for each frame G Imprinting of the date and time This section gives a detailed description of how to order your prints with the FinePix50i. Note that some printers do not support date and time imprinting or specification of the number of prints. Note that the warnings shown below may be displayed while you are specifying the prints. º (P. 117) When you erase the image, the DPOF setting for that image is deleted at the same time. A confirmation screen will appear to proceed, press the "MENU/OK" button. oe (P. 118) If you load a SmartMedia that contains frames specified for printing on another camera, those print specifications are all reset and replaced by the new print specifications. 4 (P. 118) !G If you do not want to protect any images, press the 80 "BACK" button to return to the menu. To exit the menu screen, press the "BACK" button again. No more than 1000 frames can be specified on the same SmartMedia. 81 PLAYBACK MENU F DPOF DATE SETTING 1 0 2 0 PLAYBACK MENU F DPOF SET FRAME 1 0 2 0 1 2 1 0 2 0 1 2 1 0 2 0 4 This function allows you to select whether or not the date of shooting is included on the print. 1Press the "MENU/OK" button to display the menu on the LCD monitor. 2Use "d " or "c " to specify "DATE ON" or "DATE OFF". The setting is then effective until it is changed or until the camera is switched off. 1Use "a(8 )" or "b(9 )" to select "FRAME SET". 2Press the "MENU/OK" button. 1Use "d" or "c" to display the frame to be specified. 2Use "a(8)" or "b(9)" to specify the number of prints. The "d" icon and the number of prints is displayed for the frames for which settings have been confirmed. If the date has been set, the "k" icon is also displayed. !G The 82 DPOF menu is not displayed during movie or audio recording playback. G DPOF settings cannot be specified for movies or audio recordings. !G Before specifying any other settings, first specify whether the date is to be shown or not. "d" or "c" to advance or go back a frame automatically confirms the setting. !G Before specifying "FRAME SET", always specify whether the date is set. To continue using "FRAME SET", repeat steps 1 and 2. G G 83 PLAYBACK MENU F DPOF SET FRAME PLAYBACK MENU F DPOF REVIEW/RESET 1 0 2 0 3 4 1 2 4 <To Apply the Settings> When you have finished specifying the DPOF settings, always press the "MENU/OK" button to confirm the settings. The total number of prints appears on the LCD monitor and the menu screen reappears. <To Cancel the Settings> Pressing the "BACK" button only cancels the setting for the currently selected frame. You cannot cancel settings for frames other than the currently selected frame. [. . . ] These actions could damage the cord and cause a fire or electric shock. Load the batteries with the poles positioned as indicated by the and marks. Do not use chargers other than the specified model to charge the battery. Any of these actions can cause the batteries to burst or leak and cause fire or injury as a result. WARNING Use only the batteries or AC power adapter specified for use with this camera. [. . . ]