User manual FUJIFILM FINEPIX A101

[. . . ] BL00034-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 2Use "a" or "b" to select the setting for the frame to be printed. If you have selected the date setting, the "k" icon is displayed. You can only specify one print per frame (image) in the DPOF settings. 3With "OK" selected, press the "MENU/OK" button. 1If you select a frame for which DPOF settings have already been specified, the "º" message appears. 2Pressing the "MENU/OK" button erases all the DPOF settings already specified. Note also that you can specify prints for up to 999 frames on the same SmartMedia. 50 !G You cannot specify printing for more than one print per frame. !G Press the "BACK" button to leave the previous settings unchanged. G You can check the previous settings by playing back the images (P. 26). !G "TOTAL" shows the total number of frames for which prints have been ordered. To specify additional DPOF settings, repeat steps 0 1 and 0 and select "SET" for the frames to be printed. 2 Pressing the "MENU/OK" button confirms all the To specify additional DPOF settings, repeat settings. You cannot reset a portion of the steps 0 and 0 and select "SET" for the frames 1 2 settings without to be printed. resetting them all. 51 5 Settings I List of settings 4 Still Image mode 1 AUTO 2 MANUAL j FILE SIZE (P. 54) SETTINGS USING THE OPTION MENU 13 00 2 0 Using SET­UP The "Settings" chapter looks at functions available from "dOPTION" in the "q" still Image, "e" movie and "3" playback. 1 0 h Movie mode -- -- -- SET­UP LCD BRIGHTNESS (P. 55) 2 0 3 Playback mode -- -- -- SET­UP LCD BRIGHTNESS (P. 55) Photography Playback SET­UP LCD BRIGHTNESS (P. 55) I SET­UP menu options Settings Display Factory default Explanation This is a function that reduces power consumption and then automatically switches the camera off to prevent battery depletion when the camera is not being used. This setting selects the volume of the beep emitted by the camera during camera operation. Select English or French as the language used for screen display. POWER SAVE ON/OFF ON USB MODE DATE/TIME BEEP T LANGUAGE DSC/PC CAM SET 3 LOW/HIGH/OFF ENGLISH/FRANCAIS DSC -- LOW ENGLISH 1Press the "MENU/OK" button to display the menu screen. 2Use "d" or "c" to select "dOPTION" and "a" or "b" to select the desired setting. 3Press the "MENU/OK" button to move to the selected setting. If you selected "SET­UP", the "SET­UP" screen appears. G For "DATE/TIME" press "c". 53 d j SETTING THE FILE SIZE AND QUALITY (COMPRESSION RATIO) You can choose any combination of 2 file sizes and 3 image quality settings. Use the table below as a guide to the best settings for your shots. File size 9 (1280 × 960) 0 (640 × 480) FINE ! -- d LCD MONITOR BRIGHTNESS 1 0 2 0 1 2 1 0 2 0 NORMAL !@ BASIC @ -- !: For printing at A6 size @: For use via the Internet as an e-mail attachment, etc. Quality (compression ratio) Select "FINE" for better image quality and "BASIC" to increase the number of available shots. In most cases, the "NORMAL" setting provides more than adequate image quality. 1Use "d" or "c" to adjust the LCD monitor brightness. 2Press the "MENU/OK" button to confirm the adjustment. 1Use "a" or "b" to change the file size setting and "d" or "c" to change the quality setting. [. . . ] This icon indicates that personal injury or material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the information which is to be observed. Triangular icons notify the user of information requiring attention ("Important"). Circular icons with a diagonal bar notify the user that the action indicated is prohibited ("Prohibited"). Filled circles with an exclamation mark notify the user of an action that must be performed ("Required"). 80 Do not use in the bathroom or shower. 81 Safety Notes WARNING Never attempt to modify or disassemble the camera. [. . . ]