User manual FUJIFILM FINEPIX A605

[. . . ] 1 2 3 4 5 6 OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A605 correctly. Please follow the instructions carefully. Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images BL00396-100 (1) Warning Please read the Safety Notes (P. 81) and make sure you understand them before using the camera. EC Declaration of Conformity We Name: Address: Fuji Photo Film (Europe) G. m. b. H. Heesenstrasse 31 40549 Dusseldorf, Germany IMPORTANT NOTICE BEFORE OPENING THE PACKAGE OF CD-ROM PROVIDED BY FUJI PHOTO FILM CO. , LTD. , PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. ONLY IF YOU DO AGREE TO THIS AGREEMENT, YOU WILL BE ABLE TO USE THE SOFTWARE RECORDED ON THE CD-ROM. [. . . ] i To play back movie files on a computer, save the movie file on the xD-Picture Card to the computer's hard disk and then play back the saved file. 42 43 4 Settings 1 10 6 ADJUSTING THE MONITOR BRIGHTNESS 2 0 1 Press the "Playback" button for approx. 2 Press the "MENU/OK" button to display the menu on the LCD monitor. SET-UP F USING THE SET-UP SCREEN 13 1 00 2 0 1 Press the "MENU/OK" button to display the menu on the LCD monitor. 2 Press "d" or "c" to select "F" OPTION and then press "a" or "b" to select "SET-UP". 3 Press the "MENU/OK" button to display the SET-UP screen. 1 20 2 0 1 Press "d" or "c" to select "F" OPTION and then press "a" or "b" to select "6LCD". Opening the battery cover or disconnecting the AC power adapter without turning the camera off may cause the camera settings to revert to the factory default values set at shipment. 2 3 1 0 2 0 ! To exit this procedure without changing the settings, press the "DISP/BACK" button. Press "d" or "c" to move to option 1 to 4. 1 Press "d" or "c" to adjust the LCD monitor brightness. 2 Press the "MENU/OK" button to confirm the new setting. 1 30 2 0 1 Press "a" or "b" to select a menu option. 2 Press "d" or "c" to change the setting and then press "c" for "FORMAT", "DATE/TIME", "TIME DIFFERENCE", "DISCHARGE" or "qRESET". 4 Settings 4 After you have changed the settings, press the "MENU/OK" button to confirm the changes. 44 45 SET-UP SET-UP menu options Settings IMAGE DISP. POWER SAVE SETTING Factory default ON Display ON/OFF Explanation Specifies whether an image checking screen (photography result) appears after taking a picture. Reduces the camera's power consumption and to subsequently turn the camera off when not being used. Sets the volume of the tone emitted when the camera controls are used. Specifies whether the LCD monitor is ON or OFF when the camera is turned on in Photography mode. Specifies whether frame numbers are assigned consecutively from previous numbers or begin again. Selects the function when the camera is connected to a computer or a printer. Resets all the camera settings (other than the DATE/TIME, TIME DIFFERENCE, LANG. To reset the camera settings, press the "MENU/OK" button again. 1 POWER SAVE FORMAT § BEEP DATE/TIME TIME DIFFERENCE 2 MIN/5 MIN OK LOW/HIGH/OFF SET SET ON/OFF CONT. /RENEW ¶/qWEB/ ¢ 2 MIN ­ LOW ­ ­ ON CONT. ¶ When this function is enabled, the screen temporarily turns off (Sleep mode) and the viewfinder lamp (green) blinks at 1-second intervals to save power if the camera is not used for 30 seconds. If the camera remains unused for an additional interval (2 or 5 minutes), it is turned off. Use this function when you want to get the maximum possible running time from your batteries. ! The Power save setting is disabled during automatic playback, during rechargeable batteries discharging and when a USB connection is being used. 2 qLCD FRAME NO. USB MODE The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it is left unused for a set some time (2 or 5 minutes). 3 VIDEO SYSTEM DISCHARGE NTSC/PAL OK ENGLISH PAL ­ When the camera is in Sleep mode, pressing "a", "b", "d" or "c" wakes the camera up. This is useful since the camera can be ready to take pictures instantly. Pressing any other button as well as "a", "b", "d" and "c" wakes the camera up. 4 qRESET OK ­ To restore power to the camera To take pictures, briefly close and then re-open the lens cover. [. . . ] Circular icons with a diagonal bar tell you that the action indicated is prohibited ("Prohibited"). Filled circles with an exclamation mark tell you an action that must be performed ("Required"). Do not use in the bathroom or shower. Do not disassemble. Exif Print Format is a newly revised digital camera file format that contains a variety of shooting information for optimal printing. 80 81 Safety Notes WARNING Do not heat, change or take apart the batteries. Do not use chargers other than the specified model to charge the batteries. Any of these actions can cause the batteries to burst or leak and cause fire or injury as a result. [. . . ]