User manual FUNAI F100DB

[. . . ] If you need additional assistance for set-up or operating after reading owner's manual, please call TOLL FREE : 1- 800 - 242-7158 Please read before using this equipment. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. FCC WARNING- This equipment may generate or use radio frequency energy. [. . . ] OPEN/CLOSE Button [page 13] Press to insert discs into or remove them from the tray. AUDIO Button [page 18] Press to select a desired audio language or sound mode. ANGLE Button [page 19] Press to change the camera angle to see the sequence being played back from a different angle. Arrow Buttons Use when making settings while watching the display on a TV screen. note ¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV's If using this DVD player to play back a DVD in a 5. 1 channel Dolby Digital surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters. 6] Notes ¡Be sure to turn off the power to all components in the system before connecting another component. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct. ) Notes ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc. ¡If a disc is dirty or has scratches, the pictures may ¡The power will turn on. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback. Program signals, playback may start from the second title, or it may skip these titles. ¡Make sure the disc is sitting properly in the correct Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button. ¡When you play back the DVD which a title menu is With a DVD containing a title menu, you can select desired titles from the menu. Press 'PLAY' to play from here To play beginning, press 'STOP' first and the 'PLAY'. You can also press the SEARCH MODE button, use the numeric buttons to enter the track number, when the track number is entered in the entry box, playback of the desired track will start automatically. If the SKIP button G is pressed during playback or while playback is paused, the current track is skipped and the next track is played. When the SKIP button H is pressed once, the top of the current track is located for replaying. [. . . ] The player does not ¡Obstacles present between the remote control and the sensor. ¡Insert a correct video disc that plays on this Disc cannot be played Distorted picture Audio or subtitle language does not match the setup. ¡Immediately after playing, press ¡There are some cases where pictures may be ¡The selected language is not Slightly distorted, which are not a sign of a malfunction. ¡The DVD does not contain sequences recorded from different camera angles. [. . . ]