User manual FUNAI FTR9TC
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUNAI FTR9TC. We hope that this FUNAI FTR9TC user guide will be useful to you.
Manual abstract: user guide FUNAI FTR9TC
Detailed instructions for use are in the User's Guide.
[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear of the cabinet.
IMPORTANT SAFEGUARDS
1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] After rewinding finishes, the unit will eject the tape and turn itself off. This function is operative when Repeat Play is set to the [OFF] position. The tape will not auto-rewind during timer recording or One Touch Recording.
- 29 -
EN
1C29
RECORDING
Make sure . . . · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. ) NOTES: · This unit will ONLY record and view the same channel. · This unit cannot record the contents from the built-in DVD.
NORMAL RECORDING
TV/VCR
You can ONLY watch the same TV program that is being recorded.
SKIPPING UNWANTED SCENES DURING RECORDING
TV/VCR
Press the PAUSE button to temporarily stop recording. NOTES: · After 5 minutes, the unit will automatically switch to the Recording mode to prevent tape damage. · If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappear.
PAUSE SP
1
Select the channel to be recorded
Press the number buttons on the CH 10 remote control or the CHANNEL button K or L. Remember: If the unit is connected to a cable box or satellite box, the unit must be on CH3 or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
SP
3
Begin recording
REC
Press the RECORD button.
SP
4
Stop recording
Press the STOP button when recording is completed.
- 30 -
EN
1C29
OTR (One Touch Recording)
TV/VCR
This function enables you to set a recording length simply by pressing the REC/OTR button on the unit. · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. ) NOTES: · You cannot start OTR with the remote control. · If a cable box or satellite box is connected with the unit you will be limited to record only one channel, and the channel selector on the unit must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. · Clock must be set to the correct time and date before setting the timer. · Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. ) · The channel you want to record is properly set in advance. There is a chance that a program will not be recorded, when programs overlap; · The program with an earlier start has priority. · Once the earliest program finishes, the overlapping programs will begin recording in sequence. · The illustration below demonstrates the sequence of recordings. Program 1 10:00AM - 11:00AM Program 2 9:00AM - 10:00AM Program 3 9:30AM - 12:00PM
Recording Sequence
Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM
9:00AM 10:00AM 11:00AM 12:00PM
1
Select "TIMER PROGRAMMING"
- TV/VCR SETUP B TIMER PROGRAMMING SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH
Press the SETUP button on the remote control. Confirm "TIMER PROGRAMMING" is pointed by pressing the Arrow button K, then press the ENTER button. · If you have not yet set the clock, "MANUAL CLOCK SET" appears. Then set the timer recording.
2
Select your desired program
TIMER PROGRAMMING CH DATE B-/-/-/-/-/-/-/-/BEGIN END -:-:-:-:-:-:-:-:-:- -:- -:- -:- -:- -:- -:- -:- -
position (1~8)
Press the Arrow button K or L to select the desired program position. [. . . ] · El televisor/videograbadora/DVD puede reconocer los canales de TV para que sean canales de TV de antena de cable con las condiciones de recepción. En este caso, pruebe nuevamente con el prefijado automático en las condiciones de recepción fina.
componentes, si es necesario.
1 Presione el botón POWER. 2 Presione el botón OPEN/CLOSE para abrir
la bandeja de carga del disco.
3 Ponga el disco deseado en la bandeja, con
la etiqueta hacia arriba.
4 Presione el botón PLAY.
¡La bandeja se cerrará automáticamente y la repro-
AJUSTE DEL RELOJ
TV/VCR
Cerciórese. . . · La alimentación del televisor/videograbadora/DVD deberá estar conectada. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FUNAI FTR9TC
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUNAI FTR9TC will begin.