User manual FUNAI PV910
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FUNAI PV910. We hope that this FUNAI PV910 user guide will be useful to you.
Manual abstract: user guide FUNAI PV910
Detailed instructions for use are in the User's Guide.
[. . . ] 4 Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · The Auto Repeat playback will start automatically if you set "AUTO REPEAT" to "ON" in the stop mode.
Recording
Recording & OTR (One Touch Recording)
Before: Turn on the TV and set it to channel .
· If channel has been already occupied for broadcasting, see "RF Output Channel" section on page 6.
VCR
3
POWER SPEED AUDIO
6
OPEN/CLOSE /EJECT
1
2
OPEN/CLOSE
1
Insert a cassette with tab into this unit.
2
1 4 7
1
2 5 8 0
3
SKIP/CH.
OUTPUT POWER REW F. FWD STOP/EJECT PLAY
/
VCR Functions
Select the channel to record.
2 5 8 0 3 6 9
2
4 7
6
VCR/TV
VIDEO
VCR REC/OTR CHANNEL
DVD SKIP H
DISC IN STOP
P
AUDIO
9 +10
DVD SLOW PAUSE
REV
or
DISPLAY
SKIP/CH.
VCR
PLAY
56 4
Accidental erasure prevention
RETURN
3
Press [SPEED] to select the desired tape speed.
SPEED
Tape Speed Type of tape SP mode SLP mode Recording/Playback Time T60 T120 T160 1hour 2hours 2-2/3hours 3hours 6hours 8hours
5 4
STOP REC/OTR
MENU SETUP MODE
SUBTITLE T-SET
ENTER TOP MENU ZOOM ANGLE
SEARCH MODE
To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later, cover the hole with adhesive tape.
Record tab
CLEAR/ C. RESET
SP
You CAN NOT dub a DVD to a videotape.
REPEAT A-B
4
Press [REC/OTR] repeatedly to select the desired recording length.
REC (Normal recording) OTR(0:30) OTR(1:00). . . . . OTR(7:30)
To stop recording temporarily (Pause mode)
Press [PAUSE F]. · During the rec-pause mode, five C marks appear on the TV screen. · Pause mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.
REC/OTR
REC
OTR(8:00)
5
To stop recording
PLAY STOP
6
To eject the recorded cassette
OPEN/CLOSE /EJECT
Hint
· If you want to watch one channel while recording another. . . 2) Select a channel you want to watch with the cable box or the satellite box.
Timer Recording
VCR
· Insert a tape with its record tab into the unit.
-MENUTIMER PROGRAMMING PROG 1245678 DATE START TIME END TIME CHANNEL REC SPEED
4
1
Select the desired date. Then press [B] to go to next step.
or
ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 2 MON START TIME : END TIME : CHANNEL REC SPEED
Press [MENU], then select "TIMER PROGRAMMING".
MENU
B TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP CLOCK SET LANGUAGE SELECT
or
Available program number flashes.
2
Select an empty program number. Then press [B] to go to next step.
or
· You can set a program one year in advance.
PROGRAM NUMBER 1 DATE / START TIME : END TIME : CHANNEL REC SPEED
5
Select the desired start time (hour). Then press [B] to go to next step.
or
ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 1 0 / 2 MON START TIME 0 7 : 0 END TIME : CHANNEL REC SPEED
3
Select "ONCE", "DAILY" (Mon-Fri), or "WEEKLY". PROGRAM Then press [B] to go to next step.
or
NUMBER 1
B ONCE DAILY WEEKLY
or
12
EN
6
Select "AM" or "PM". Press [DVD] on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. NOTE (for Timer Recording) : · If there is a power failure or the unit is unplugged for more than 0 seconds, clock and all timer settings will be lost.
1
EN
VCR Functions
or
PROGRAM NUMBER 1 DATE 1 0 / 2 MON START TIME 0 7 : 0 PM END TIME 0 8 : 0 PM CHANNEL 16 REC SPEED SP B SP SLP
1) Press [SUBTITLE/T-SET] then, [VCR] on the remote control. ) Select "TIMER PROGRAMMING" by using [K/L], then press [B]. · You may cancel the entire program by pressing [s] while the program number blinks. 6) Press [SUBTITLE/T-SET] to return to timer standby mode.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of TV) (Back of another source) or
DVD/VCR
COMPONENT VIDEO OUT
(Back of DVD/VCR*)
VCR
AUDIO OUT
AUDIO OUT
L
AUDIO IN
Y CB CR
R
VIDEO OUT VIDEO VIDEO OUT IN
Connect
ANT-OUT
1
ANT-IN
DIGITAL AUDIO OUT
DVD AUDIO S-VIDEO OUT OUT
DVD/VCR
COMPONENT VIDEO OUT
VCR
AUDIO OUT
Y CB
L
AUDIO IN
ANT-IN
L R
VIDEO OUT
Connect
RF cable
(supplied)
2
COAXIAL
R CR
VIDEO IN
ANT-OUT
(commercially available)
Audio/Video cables
*Front input jacks are also available
1) Insert a pre-recorded tape into another VCR for playing. ) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP). 4) Select the "L1" or "L2" position on the recording unit. · To use the input jacks on the back of this unit, select "L1" position by pressing [0], [0], [1] on the remote control or [CHANNEL K/L] on this unit. · To use the input jacks on the front of this unit, select "L2" position by pressing [0], [0], [2] on the remote control or [CHANNEL K/L] on this unit. 7) To stop recording, press [STOP/EJECT C A] on the recording unit, then stop playback of the tape in another source.
Hint
· For best results during dubbing, use the front panel controls whenever possible. · Always use video-quality shielded cables with RCA-type connectors. [. . . ] Then press [B] to go to next step.
or
CLOCK SET MONTH DAY 10 / 02 HOUR MINUTE : YEAR AM/PM
MENU SETUP TOP MENU ZOOM ANGLE
ENTER RETURN
SEARCH MODE CLEAR/ C. RESET
DVD OUTPUT light OUTPUT button VCR OUTPUT light
MODE
SUBTITLE T-SET
REPEAT
A-B
4
Select the current year. Then press [B] to go to next step.
or
CLOCK SET MONTH DAY 10 / 02 HOUR MINUTE : YEAR 2006 AM/PM
Press [VCR] on the remote control. (Verify that the VCR OUTPUT light is lit. ) Press [DVD] on the remote control. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FUNAI PV910
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FUNAI PV910 will begin.