User manual GAI-TRONICS 12576-502

[. . . ] 42004-732L2A GAI-TRONICS® CORPORATION A HUBBELL COMPANY Model 12576-502 Desktop Access Panel Confidentiality Notice This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. General Information Product Overview The Model 12576-502 Desktop Access Panel is a component of GAI-Tronics' ADVANCE system. The operation of each access panel is programmed at the ADVANCE system control cabinet. [. . . ] Fold the tab at the end of the slide-in label so that it is perpendicular to the rest of the label. Slide the label into the appropriate slot opening located at the top of each of the button columns. Slide the label out using the tab that has been exposed. f:\standard ioms - current release\42004 instr. manuals\42004-732l2a. doc 08/10 Model 12576-502 Desktop Access Panel Pub. 42004-732L2A Page: 8 of 11 Operation The access panel operator is capable of voice communication and system control functions. The following paragraphs provide a general overview of the available access panel features. Operation details for the access panel are determined by software programming at the ADVANCE system control cabinet. In general, the access panel handset is used for paging and party line communication. Push-button switches are used for a variety of system control functions. Push-Button Switch Summary Each push-button switch function and LED indicator (next to the switch) is programmable. Typical switch functions include alarm activation/reset, paging zone selection, or beacon activation/reset, but other special functions are available through system programming. Paging and Party Line Operation (typical) Complete the following steps to make a page announcement from an access panel. After the short "wait" tone is heard, speak directly into the microphone to broadcast your announcement. Upon releasing the pressbar switch, the access panel handset is connected to party line 1. The paged individual(s) responds by picking up a station's handset and turning the selector switch to party line 1. Other individuals can also pick up a handset and join the conversation at any time. Always return the handset to the cradle following a page or a party line conversation. NOTE: To cancel any selected destination push-button switch, press the switch again and the LED will extinguish. The access panel automatically deselects the paging destination(s) after a page is completed. Paging Confirmation Tones When paging from an access panel, a short "wait" tone will be heard in the handset receiver when the page switch is depressed. When the tone ceases, the page request has been granted by the system control cabinet. If a busy tone is heard, the page request has been rejected and the operator must try again later. [. . . ] 0. 775 Vrms (0 dBm) Speaker Amplifier Output level (with 1. 5 Vrms on Page/Party® system). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 watts Frequency response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250­6500 Hz, +0/-3 dB ref to 1 kHz Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <1. 0% THD @ 1 kHz Mechanical Unit dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]