User manual GAI-TRONICS 12576-503

[. . . ] 42004-733L2A GAI-TRONICS® CORPORATION A HUBBELL COMPANY Model 12576-503 Desktop Access Panel with LCD Display Confidentiality Notice This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the information contained herein, and such information may only be used in connection with the operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party. General Information Product Overview The Model 12576-503 Desktop Access Panel with LCD Display is a component of GAI-Tronics' ADVANCE system. The operation of each access panel is programmed at the ADVANCE system control cabinet. [. . . ] Because printers vary, you may need to adjust the margins in the page setup to center the printed text within the perforated strips. Fold the tab at the end of the slide-in label so that it is perpendicular to the rest of the label. Slide the label into the appropriate slot opening located at the top of each of the button columns. Slide the label out using the tab that has been exposed. f:\standard ioms - current release\42004 instr. manuals\42004-733l2a. doc 08/10 Model 12576-503 Desktop Access Panel with LCD Display Pub. 42004-733L2A Page: 8 of 11 Operation The access panel operator is capable of voice communication, system control functions and viewing the system operating status on the LCD display. The following paragraphs provide a general overview of the available access panel features. Operation details for the access panel are determined by software programming at the ADVANCE system control cabinet. In general, the access panel handset is used for paging and party line communication. Push-button switches are used for a variety of system control functions. Push-Button Switch Summary Each push-button switch function and LED indicator is programmable. Typical switch functions include alarm activation/reset, paging zone selection, or beacon activation/reset, but other special functions are available through system programming. Paging and Party Line Operation (typical) Complete the following steps to make a page announcement from an access panel. After the short "wait" tone is heard, speak directly into the microphone to broadcast your announcement. Upon releasing the pressbar switch, the access panel handset is connected to party line 1 (default). The paged individual(s) responds by picking up a station's handset and turning the selector switch to party line 1. The handset remains inoperative until it is physically placed back on-hook. The off-hook timeout can be disabled or set from 1­25 minutes in 1-minute intervals. Handset Paging Pre-announcement Tones An access panel page can be preceded by one of two available tones. Tone selection is based on the system mode of operation at the time of the page (normal or alarm). The "Splash" is a Hi-Lo tone approximately 1 second in duration. The "Alert" is a swept tone approximately 1 second in duration. [. . . ] 3 mVrms High signal input for 1. 5 Vrms on Page/Party® system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 775 Vrms (0 dBm) External Contact Input Contact closure resistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 k-ohm maximum External Audio Output Output level (with 1. 5 Vrms on Page/Party® system). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 775 Vrms (0 dBm) Mechanical Unit dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]