User manual GARMIN G1000: CESSNA MUSTANG COCKPIT REFERENCE GUIDE (0435.11 OR LATER) REV. A, APR, 2008
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GARMIN G1000: CESSNA MUSTANG. We hope that this GARMIN G1000: CESSNA MUSTANG user guide will be useful to you.
You may also download the following manuals related to this product:
GARMIN G1000: CESSNA MUSTANG PILOT'S GUIDE (0435.08 OR LATER) REV. B, MAY, 2007 (35494 ko)
GARMIN G1000: CESSNA MUSTANG PILOT'S GUIDE (0435.11 OR LATER) REV. B, MAY, 2008 (61903 ko)
Manual abstract: user guide GARMIN G1000: CESSNA MUSTANGCOCKPIT REFERENCE GUIDE (0435.11 OR LATER) REV. A, APR, 2008
Detailed instructions for use are in the User's Guide.
[. . . ] G1000
®
Integrated Flight Deck
Cockpit Reference Guide for the Cessna Citation Mustang
Flight instruments eiCAs nAv/Com/trAnsponder/Audio pAnel AutomAtiC Flight Control system gps nAvigAtion Flight plAnning proCedures hAzArd AvoidAnCe AdditionAl FeAtures AbnormAl operAtion AnnunCiAtions & Alerts Appendix index
Copyright © 2006-2008 Garmin Ltd. All rights reserved.
This manual reflects the operation of System Software version 0435. 11 or later for the Cessna Citation Mustang. Some differences in operation may be observed when comparing the information in this manual to earlier or later software versions.
Garmin International, Inc. , 1200 East 151st Street, Olathe, Kansas 66062, U. S. A. Tel: 913/397. 8200 Fax: 913/397. 8282 Garmin AT, Inc. , 2345 Turner Road SE, Salem, OR 97302, U. S. A. [. . . ] The departure is active when the flight plan is active.
Flight Instruments EICAS Nav/Com/ XPDR/Audio AFCS GPS Nav Flight Planning Procedures
ACtivAte A depArture leg
1) 2) 3) 4) 5) Press the FPL Key for the MFD to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the departure. With `ACTIVATE' highlighted, press the ENT Key.
Hazard Avoidance Additional Features Abnormal Operation Annun/ Alerts
loAd An ArrivAl proCedure
1) 2) 3) Press the PROC Key. The cursor is displayed in the `ARRIVAL' field with a list of available arrivals.
29
Appendix Index
190-00600-02 Rev. A
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang
procedures
Flight Instruments
4) 5) 6) 7) 8) 9)
Turn the large FMS Knob to highlight the desired arrival. Press the ENT Key.
Nav/Com/ XPDR/Audio
EICAS
10) With `LOAD?' highlighted, press the ENT Key. 11) The arrival becomes part of the active flight plan.
AFCS GPS Nav
ACtivAte An ArrivAl leg
1) 2) 3) 4) 5) Press the FPL Key to display the active flight plan. Turn the large FMS Knob to highlight the desired waypoint within the arrival. With `ACTIVATE' highlighted, press the ENT Key.
Hazard Avoidance Additional Features
Procedures
Flight Planning
loAd And/or ACtivAte An ApproACh proCedure
NOTE: If certain GPS parameters (WAAS, RAIM, etc. ) are not available, some published approach procedures for the desired airport may not be displayed in the list of available approaches.
Abnormal Operation
1) 2) 3) 4) 5) 6)
30
Press the PROC Key. A list of available approaches for the destination airport is displayed. A list of available transitions for the selected approach procedure is now displayed. The "Vectors" option assumes vectors will be received to the final course segment of
Garmin G1000 Cockpit Reference Guide for the Cessna Citation Mustang 190-00600-02 Rev. A
Index
Appendix
Annun/ Alerts
procedures
the approach and will provide navigation guidance relative to the final approach course. If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure.
Flight Instruments EICAS Nav/Com/ XPDR/Audio
9)
AFCS
10) Press the ENT Key. 11) Turn the large FMS Knob to select either `LOAD?' or `ACTIVATE?'. Selecting `LOAD?' enters the selected approach procedure into the active flight plan, but is not currently active. Selecting `ACTIVATE?' enters the selected approach procedure into the active flight plan and activates the first leg of the approach. 12) Press the ENT Key.
GPS Nav Flight Planning Procedures
ACtivAte An ApproACh in the ACtive Flight plAn
1) 2) 3) Press the PROC Key. Press the ENT Key.
Hazard Avoidance Additional Features
ACtivAte A veCtor to FinAl ApproACh Fix
1) 2) 3) 4) Press the PROC Key. The final approach course becomes the active leg.
Abnormal Operation Annun/ Alerts Appendix Index
190-00600-02 Rev. [. . . ] Displayed magnetic course angles may differ from the actual magnetic heading by more than 2°. Synthetic Vision is disabled because the aircraft is not within the boundaries of the installed terrain database. Synthetic Vision is disabled because a terrain database of sufficient resolution (9 arc-second or better) is not currently installed. Message criteria entered by the user.
Procedures Hazard Avoidance Additional Features Index Appendix Annun/ Alerts Abnormal Operation
Flight Planning
GPS Nav
AFCS
Nav/Com/ XPDR/Audio
EICAS
SVS SVS DISABLED: Out of available terrain region. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GARMIN G1000: CESSNA MUSTANG
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GARMIN G1000: CESSNA MUSTANG will begin.