User manual HAMPTON BAY HB50 REV. G

[. . . ] Before installation or service, disconnect the power supply to the work area by removing the fuse, "tripping" the circuit breaker, or unplugging the unit. 3 IMPORTANT SAFETY INSTRUCTIONS This appliance must only be used after it has been installed in cabinetry to ensure all electrical components are shielded. Tampering with electrical connections or components and mechanical parts is dangerous and can cause machine damage. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for service. [. . . ] Only use the warming drawer with the non-slip mat in place to prevent injuries and machine damage. Before cleaning the appliance, trip the circuit breaker and allow the appliance to cool. Steam could penetrate electrical components and cause a short circuit. 5 IMPORTANT SAFETY INSTRUCTIONS General notes Children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. Caution: Do not store items of interest to children in cabinets above or in the warming drawer. Children climbing on the appliance to reach these items could be seriously injured. Loose-fitting or hanging garments should never be worn while using the warming drawer. Due to the high temperatures radiated, objects left near the appliance could catch fire. When using kitchen appliances near the warming drawer, make certain that the power cords do not come in contact with or get caught in the drawer. In areas subject to infestation by cockroaches or other vermin, keep the appliance and its surroundings clean at all times. Any damage caused by pests will not be covered by the appliance warranty. Danger of burns! Appliance front and control panel ^ All external surfaces and controls can be cleaned with warm water and liquid dish soap applied with a sponge. ^ Wipe dry using a soft cloth. Glass Glass surfaces can be cleaned with a glass cleaner. Stainless steel Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. Avoid the following on all surfaces: - abrasive cleaning agents, e. g. pot scourers or sponges that were used with abrasive cleaning agents, - oven sprays. 16 Warming drawer care Drawer The drawer can be removed for easier cleaning. Removing the drawer Non-slip mat Clean the non-slip mat by hand with warm water and liquid dish soap. Only put the non-slip mat back in the drawer when it is completely dry. The non-slip mat is not suitable for cleaning in a washer or dishwasher. Rack ^ Clean the rack with warm water and liquid dish soap or a non-abrasive stainless steel cleaner. ^ Pull the drawer completely out and loosen the nuts. ^ Clean all surfaces of the drawer and the non-slip mat with a solution of warm water and liquid dish soap. ^ Replace the drawer in reverse order. 17 Frequently asked questions , Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Turn the timer to a time and/or temperature setting. Adjust the temperature setting. Check the the temperature setting and make sure the food is not too close to the heating element. The fan should shut off automatically after 30 minutes of turning the drawer on. [. . . ] ­ The drawer should be installed clear of drafts caused by open doors and windows. ­ Proper clearance must be allowed for the warming drawer to open with out interference. ­ The warming drawer must be secured to cabinetry to prevent the drawer from tipping when loaded. ­ The warming drawer should be level to prevent the drawer sliding open or closed on its own. [. . . ]