Detailed instructions for use are in the User's Guide.
[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. [. . . ] · For this connection, another RGB cable (commercially available) is required.
25
Controlling the Projector by a Computer
When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS232C adaptor* (optional: AN-A1RS) and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 56 for detail.
When connecting to a computer using an RS-232C serial control cable and a DIND-sub RS-232C adaptor To RS-232C terminal
Computer To RS-232C terminal
DIN-D-sub RS-232C adaptor* (optional: AN-A1RS) * This adaptor is only supplied with XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164. RS-232C serial control cable (cross type, commercially available)
Note · The RS-232C function may not operate if your computer terminal is not correctly set up. · See page 55 for connection of an RS-232C serial control cable.
Info
· Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. · Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer.
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet.
Supplied accessory
Power cord
AC socket
26
To AC outlet
Turning the Projector On/Off
Info
Turning the Projector on
Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 23 to 26. ) Remove the lens cap and press S STANDBY/ON on the projector or fON on the remote control.
· When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 44 for details.
· English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 42.
Lamp indicator
Power indicator
STANDBY/ON button
Note
· About the Lamp Indicator The lamp indicator illuminates to indicate the status of the lamp. (Move the slide bar in the - direction. )
3
Press g KEYSTONE.
· The on-screen display of the Keystone Correction mode will disappear. · You can also use d KEYSTONE on the projector.
Info
· While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged.
When using XG-MB65X-L or ZOIDS LIGER ZERO SCHNEIDER 83164
· The projector automatically detects tilt and the AUTO KEYSTONE feature automatically corrects trapezoidal distortion.
Note · Automatic Keystone Correction may not work well in some cases, such as when the screen is leaning, temperature is extremely high or low, or zoom is at maximum or minimum. In these cases, fine adjust the Keystone Correction following steps 1 to 3. · You can select "On" or "Off" for the Auto Keystone Correction mode. (See page 41. )
31
Image Projection (Continued)
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "BORDER" or "STRETCH" image.
Press HRESIZE.
· See page 41 for setting on menu screen.
RESIZE button
Computer
NORMAL
XG-MB65X-L/55X-L/ XR-10X-L SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 XR-10S-L
BORDER
XG-MB65X-L/55X-L/ XR-10X-L XR-10S-L
STRETCH
XG-MB65X-L/55X-L/ XR-10X-L XR-10S-L
4:3 aspect ratio
1024 K 768
800 K 600
768 K 576
600 K 450
1024 K 576
800 K 450
1024 K 768 J
800 K 600 J
768 K 576 J
600 K 450 J
1024 K 576 1024 K 576
800 K 450 800 K 450
Other aspect ratios
Input Signal Computer Image type NORMAL
Output screen image BORDER STRETCH
XG-MB65X-L/55X-L/ XR-10X-L
Resolution lower than XGA
XR-10S-L
Resolution lower than SVGA
XGA
SVGA
4:3 aspect ratio
Resolution higher than XGA
Resolution higher than SVGA
SXGA (1280K1024)
5:4 aspect ratio
1280K720
16:9 aspect ratio
* Mode for projecting an image with the original aspect ratio without cutting any portions.
: Cutout area on which images cannot be projected.
32
VIDEO
· "STRETCH" is fixed when 540P, 720P or 1080I signals are entered.
Input Signal DVD / Video Image type NORMAL
Output screen image BORDER STRETCH
4:3 aspect ratio
480I, 480P, 576I, 576P, NTSC, PAL, SECAM
Letter box
Squeezed 16:9 image
Squeezed 4:3 image
Basic Operation
16:9 aspect ratio
540P, 720P, 1080I
16:9 aspect ratio (4:3 aspect ratio in 16:9)
* Mode for projecting an image with the original aspect ratio without cutting any portions. : Area on which the image is not included in the original signals.
33
Operating with the Remote Control
Adjustment buttons (P/R/O/Q)
BREAK TIMER button FREEZE button
Auto Sync (Auto Sync Adjustment)
Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto Sync function.
Note
PICTURE MODE button
AUTO SYNC button
· When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 46. )
Displaying and Setting the Freezing a Moving Image Break Timer
1
1
Press k BREAK TIMER.
· The timer starts to count down from 5 minutes.
Press NFREEZE.
· The projected image is frozen.
2
ROn-screen display
Press NFREEZE again to return to the moving image from the currently connected device.
2
Press P /R /O /Q to adjust the length of the break time. · Increases with P or Q · Shortens with O or R
5 minutes s 6 minutes s 60 minutes 4 minutes s 3 minutes s1 minute · The break time can be set in units of one minute (up to 60 minutes).
Selecting the Picture Mode
You can select the appropriate picture mode for the projected image, such as movie or video game.
Press GPICTURE MODE.
· When pressing GPICTURE MODE, the picture mode changes in the following order:
Standard Presentation Movie Game sRGB
Canceling the break time display function
Press k BREAK TIMER.
Note
· Break Timer does not function while the projector is operating the "Auto Sync", "FREEZE" or "AV MUTE" functions.
*
Note
· See page 39 for details on the picture mode. * "sRGB" is displayed only when RGB signal is input.
34
Menu Items
The following shows the items that can be set in the projector.
Main menu Sub menu
Picture Mode
"Picture" menu
INPUT 1 (RGB)/INPUT2 (RGB)
Picture Picture Mode Contrast Bright Red Blue CLR Temp Bright Boost Lamp Setting Reset SEL. /ADJ. [. . . ] (852) 2410-2623 dcmktg@srh. global. sharp. co. jp http://www. sharp. com. hk Sharp Corporation (Taiwan) 0800-025111 http://www. sharp-scot. com. tw Sharp-Roxy Sales & Service Co. (60) 3-5125678 Sharp Middle East Fze 971-4-81-5311 helpdesk@smef. global. sharp. co. jp Sharp Thebnakorn Co. 02-236-0170 svc@stcl. global. sharp. co. jp http://www. sharp-th. com Sharp Electronics Incorporated of Korea (82) 2-3660-2002 lcd@sharp-korea. co. kr http://www. sharpkorea. co. kr Sharp Business Systems (India) Limited (91) 11- 6431313 service@sharp-oa. com
Canada
Singapore
Hong Kong
U. K.
Spain
Thailand
Switzerland
Korea
Sweden
India
Austria
Appendix
63
Specifications
Product type Projector Model XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164/XR-10X-L/XR-10S-L Video system NTSC3. 58/NTSC4. 43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: [XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164/XR-10X-L] 0. 55" (14 mm), 1chip XGA DMD [XR-10S-L] 0. 55" (14 mm), 1chip SVGA DMD No. of dots: [XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164/XR-10X-L] 786, 432 dots (1, 024 [H] × 768 [V]) [XR-10S-L] 480, 000 dots (800 [H] × 600 [V]) Lens [XG-MB65X-L] 11. 15 × zoom lens, F2. 42. 6, f = 18. 721. 5 mm [ZOIDS LIGER ZERO SCHNEIDER 83164/XR-10X-L/XR-10S-L] 11. 15 × zoom lens, F2. 42. 6, f = 19. 021. 9 mm Projection lamp [XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164] 275 W DC lamp (AN-XR20L2) [XR-10X-L/XR-10S-L] 220 W DC lamp (AN-XR10L2) Component input signal 15-pin mini D-sub connector (INPUT1/2) Y: 1. 0 Vp-p, sync negative, 75 terminated PB: 0. 7 Vp-p, 75 terminated PR: 0. 7 Vp-p, 75 terminated Horizontal resolution [XG-MB65X-L/ZOIDS LIGER ZERO SCHNEIDER 83164/XR-10X-L] 600 TV lines (DTV720P) [XR-10S-L] 520 TV lines (DTV720P) Computer RGB input 15-pin mini D-sub connector (INPUT 1/2)/output RGB separate/sync on green type analog input: 00. 7 Vp-p, positive, 75 terminated (OUTPUT) signal HORIZONTAL SYNC. [. . . ]