User manual HIWATT CCAB
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HIWATT CCAB. We hope that this HIWATT CCAB user guide will be useful to you.
Manual abstract: user guide HIWATT CCAB
Detailed instructions for use are in the User's Guide.
[. . . ] HIWATT AMPLIFICATION LIMITED WARRANTY
HIWATT amplifiers are warranted against defects in materials and workmanship for five (5) full years from the date of purchase with the exception of footswitches, patch cords, tubes, transformers and meters; these are warranted for 90 days from date of purchase. This warranty is to the original purchaser only and may not be transferred. While under warranty, all replacement parts and labor will be provided without charge. [. . . ] HIWATT Amplification is not responsible for any incidental or consequential damages resulting from any defect or failure of the product other than the repair or replacement of the product under the terms of this warranty. This limited warranty gives you specific legal rights which vary from state to state and is in lieu of any and all other warranties either expressed or implied except as may otherwise be required by law.
CUSTOM HIWATT CABINETS
Thank you for purchasing a HIWATT cabinet. The Custom HIWATT Cabinet has been designed to compliment your Custom 50W or 100W Head perfectly. It is ruggedly built of 3/4" marine birch and covered with the original basket weave vinyl. It offers unique sound capabilities by virtue of its four custom designed FANE loudspeakers. We believe these units to be the finest reproducers of a wide range of vintage and modern guitar tones. The drive unit has been designed to give deep warm lows, a dynamic midrange, and pure highs with a clean drive. In addition, it is capable of reproducing awesome power when overdriven, as you will find when you use your effects processor.
OPERATION
· · The impedance of the enclosure is 16 Ohms. If you drive two units then you can plug them directly into a HIWATT amplifier and re-set the impedance selector to 8 Ohms. This is important because if incorrect impedance is selected, the amplifier will be forced into clipping before it can deliver its full output and a poor sound will result. A high quality loudspeaker lead is required to be used with your cabinet. Microphone or guitar cables must not be used as speaker leads as these can cause a multitude of problems and will invalidate your HIWATT warranty. The single situation most likely to cause damage to a valve amplifier is driving it into an open circuit. Never disconnect a loudspeaker lead at the loudspeaker end if the amplifier is still operating. This maintains the look and value of your equipment and ensures that when you come to use it there has been no accidental damage.
·
·
·
MAINTENANCE
HIWATT Cabinets require very little maintenance. If they receive regular heavy use, we recommend that the back is removed periodically and the wiring and loudspeaker fixings are checked. [. . . ] Only factory repairs are acceptable in warranty claims, and HIWATT Amplification wholly and exclusively relinquish all responsibility for any unit modified or misused in any way. DON'T place drinks on top of the cabinet or allow any liquid to fall in it. DON'T store the cabinet in wet, damp or dusty conditions.
·
· ·
FOR MORE INFORMATION AND OTHER HIWATT PRODUCTS PLEASE VISIT
W W W. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HIWATT CCAB
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HIWATT CCAB will begin.