User manual HOTPOINT CM MS QBG0

[. . . ] The manufacturer declines all responsibility for innapropiate use or incorrect setting of the controls. €¢ CAUTION : The appliance is not intended to be operated by means of an external timer or separate remote control system. 12 en • Do not store explosive or flammable substances such as aerosol cans and do not place or use gasoline or other flammable materials in or near the appliance: a fire may break out if the appliance is inadvertently switched on. €¢ Do not use accessories or attachments that are not recommended by the appliance manufacturer. [. . . ] CORRECT USE • Turn the appliance off and unplug from the supply outlet when not in use, before cleaning, assembly, disassembly or interacting with any accessory. €¢ Do not leave the appliance unattended while is operating. €¢ The appliance is exclusively designed and must only be used to make espresso coffee with “Uso Capsule System” capsules. €¢ Any other use shall be held improper and potentially dangerous. 14 en • The manufacturer shall not be held responsible for any damage due to improper, incorrect or unreasonable use. €¢ Always disconnect the plug from the electrical socket before filling the tank. €¢ Running the water pump with no water will cause the pump to overheat. CLEANING AND MAINTENANCE • The appliance must be disconnected from the power supply before carrying out any cleaning or maintenance operation. €¢ Before use, and specially recommended before very first use, carefully wipe the outside of the appliance to remove any dust that may have accumulated, then dry it with a soft cloth. Do not use any harsh abrasive cleaners, alkaline cleaning agents or scouring agents. €¢ Wash the accessories in warm soapy water and then dry with a dry towel. €¢ To prevent any damage to the appliance do not use harsh solvents, alkaline cleaning agents, abrasive cleansers or scouring agents of any kind when cleaning. €¢ Wash the tank using a hard brush, water and washing-up liquid, then clean it thoroughly, dry it and put it back to place. Main body Short and long coffee buttons Removable water tank Capsule holder Drip grid Espresso cup support Drip drawer Brewing unit Short long coffee button Long coffee button inserting any capsule, press the short coffee button (PICTURE B) and supply water for 10 seconds, then press the button again to stop. In case the coffee maker does not supply water, remove and plug the water tan checking the correct positioning. Use this procedure also in case the appliance has not been used for long time. PREPARING THE COFFEE INTRODUCTION Thank you for purchasing our product. In doing so, you have opted for an effective highperformance appliance. If the instructions on the correct use of this appliance are not observed, the manufacturer shall assume no responsibility for any resulting damage. The operating instructions may refer to different models: any difference is clearly identified. USING YOUR COFFEE MAKER PREPARING THE COFFEE MAKER Before you assemble the coffee maker, ensure that the power cord is unplugged and take care that the main body and all other parts are clean. Fit the power cord on the cable rack on the bottom of the machine based on its distance from the outlet (PICTURE A). [. . . ] Descaling must be performed once every 4 weeks; if the water is very hard, descaling is needed more often. To descale your appliance, use any commercially available non-toxic descaling product. Fill the tank with the descaling solution and follow the instructions on the product package. Press the long coffee button without inserting any capsule and supply water for 10 seconds, then press the button again to stop. [. . . ]