User manual HUBBELL LIGHTING SLS AB ALIGN DETAILS

[. . . ] A Front speaker (left) B Front speaker (right) C Center speaker D Surround speaker (left) E Surround speaker (right) F Surround back speaker (left)* G Surround back speaker (right)* H Front high speaker (left)* I Front high speaker (right)* J Subwoofer * You cannot use the surround back speakers and the front high speakers simultaneously. [. . . ] To make the correct connection, decide which to connect to the plus (+) and minus (­) terminals on the speaker. This is an example of how to connect this receiver and your components. Refer to step 3 and 4 of "Connections" of the operating instructions supplied with this receiver for details on other connections and other components. Refer to "7: Connecting the AC power cord (mains lead)" in the operating instructions supplied with the receiver. If the bass frequency is lower than you prefer, use the SPEAKER menu to set the size of the speakers. You should set up each component so that the sound is output from the speakers correctly when you play back a connected component. Press the input button on the remote to select the component you want to play back. When using front high speakers*/ Lors de l'utilisation des enceintes d'aigus avant*/ Si se utilizan altavoces frontales superiores*/ Bei Verwendung von Front-Hochtonlautsprecher* * Be sure to set the speaker pattern to a setting with front high speakers. [. . . ] Press the input button on the remote to select the component you want to play back. [. . . ]