User manual HUBBELL LIGHTING SLS INTEGRAL FIXTURE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUBBELL LIGHTING SLS INTEGRAL FIXTURE. We hope that this HUBBELL LIGHTING SLS INTEGRAL FIXTURE user guide will be useful to you.
 |
HUBBELL LIGHTING SLS INTEGRAL FIXTURE : Download the complete user guide (2627 Ko) |
Manual abstract: user guide HUBBELL LIGHTING SLS INTEGRAL FIXTURE
Detailed instructions for use are in the User's Guide.
[. . . ] A Front speaker (left) B Front speaker (right) C Center speaker D Surround speaker (left) E Surround speaker (right) F Surround back speaker (left)* G Surround back speaker (right)* H Front high speaker (left)* I Front high speaker (right)* J Subwoofer You can select the front speaker system. Refer to "Selecting the front speaker system" in the operating instructions supplied with the receiver for details. [. . . ] Refer to steps 3 and 4 of "Connections" of the operating instructions supplied with this receiver for details on other connections and other components. * You cannot use the surround back speakers and the front high speakers simultaneously. 1 channel speaker system (seven speakers and one subwoofer) configuration. Refer to the operating instructions supplied with the receiver and the other side of this guide. Connect the speakers according to the number and type of your speakers. To make the correct connection, decide which to connect to the plus (+) and minus () terminals on the speaker. When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. If you connect a subwoofer with the crossover frequency function, set the value to maximum. If you connect a subwoofer with an auto standby function, set it to off (deactivated). The Auto Calibration function allows you to measure the following: speaker connections, polarity of speakers, speaker distance, speaker size, speaker level, frequency characteristics. You should set up each component so that the sound is output from speakers correctly when you play back a connected component. to output multi channel digital audio , check the digital audio output setting on the connected components. [. . . ] For a Blu-ray Disc player, check that "Audio (HDMI)", "Dolby Digital (Coaxial/Optical)", and "DTS (Coaxial/Optical)" are set to "Auto", "Dolby Digital", and "DTS", respectively (as of March 2010). After "GUI ON" appears on the display for a while, the GUI menu appears on the TV screen. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUBBELL LIGHTING SLS INTEGRAL FIXTURE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUBBELL LIGHTING SLS INTEGRAL FIXTURE will begin.