User manual HUBBELL LIGHTING STAR GATE

[. . . ] INSTALLATION INSTRUCTIONS HUBBELL StarGate SERIES Important safety instructions pertaining to risk of fire, electric shock, and injury to persons and/or property. [. . . ] Failure to properly install this product will void manufacturer's warranty. General Information: These instructions are not intended to be a comprehensive guide to all installation issues. For technical assistance and/or warranty support, contact the manufacturer at the phone number listed below. Refer to existing ballast for electrical data, and to the retro-fit kit labeling for replacement lamp specifications. Ensure that the existing housing does not leak from above and is secured properly to the canopy and can safely support the additional weight of this retro-fit kit. Remove lens frame assembly from existing luminaire housing and discard. Remove lamp, reflector, ballast cover, and any other components that may interfere with the installation of this kit. It is not necessary to remove all components (socket, capacitor, etc. ) unless it is determined that they will prevent successful installation. Remove all hardware from door flange and any caulking from corners that may interfere with hinge operation. [. . . ] 9. COM COM TAP COM CAP GRN UCL-SGX-XXXXXX PANEL Available Accessories: UCL-SG-HS - House-side shield/reflector: Order one set for 180° shielding or two sets for 360° shielding. NOTE: Quality and product improvement is our continuous aim. [. . . ]