User manual IOMEGA QI

[. . . ] Follow the onscreen instructions. TM 2 1 2 3 If necessary, change the ZipCD drive jumper setting 1. Leave the setting in the Slave 2 position if you are connecting the ZipCD drive on the same data cable with another device. Use the Master 3 setting if the ZipCD drive will be the only device on the secondary IDE channel. (Check your computer documentation. ) TM TM 3 Shut down the computer, disconnect the power cord and remove the cover. CAUTION! [. . . ] Mounting screws must not extend into the ZipCD drive more than 6. 0 mm (about 0. 25 inch). TM 10 Check all connections, arrange the cables to fit under the cover, and replace the computer cover. Reconnect the power cord, turn on the power switch, and wait for the operating system to load. Because the ZipCD drive is plug-and-play, you will not see "New Hardware Detected" in Windows . TM ® 11 Your ZipCD drive is ready to use. Continue reading for help on using your ZipCD drive. TM TM Internal ZipCD ATAPI Drive TM PC Getting Started The ZipCD drive enables you to create CD-R (Compact Disc-Recordable) and CD-RW (Compact Disc-ReWritable) discs. You can write to CD-R discs, but you cannot erase the information on the discs. You can write to and erase information from CD-RW discs up to 1, 000 times. Use the ZipCD drive to: · Create an Audio CD · Create a Data CD · Create a Backup CD · Duplicate a CD TM TM It might be a criminal offense under applicable copyright laws to make unauthorized copies of copyright-protected material, including computer programs, films, broadcasts, and non-original sound recordings. This equipment should not be used for such purposes. 1 Creating an Audio CD 1 Double-click the Create CD icon on your desktop. 5 Drag audio tracks from the top window to the bottom CD layout window. 6 If you are copying tracks from multiple CDs, eject the first CD and insert another CD. 9 When you are prompted, insert a blank CD-R disc into your ZipCD drive. 11 When the process is complete, click OK. TM TM 2 Creating a Data CD 1 Double-click the Create CD icon on your desktop. 5 Drag the desired files from the top layout window to the bottom CD layout window. 8 When you are prompted, insert a blank CD-R or CD-RW disc into your ZipCD drive. 9 When the process is complete, click OK. TM 3 Creating a Backup CD 1 Double-click the Create CD icon on the desktop. [. . . ] Type of Equipment: Information Technology Equipment Manufacturer/Responsible Party TM Iomega Corporation 1821 West Iomega Way Roy, UT 84067 U. S. A. 801-332-1000 CLASS 1 LASER PRODUCT Copyright © 2000 Iomega Corporation. Iomega, the stylized "i" logo, ZipCD, and the ZipCD brand block are either registered trademarks or trademarks of Iomega Corporation in the United States and/or other countries. [. . . ]