User manual JURA ENA 3

[. . . ] en en en Instructions for Use en it The `ENA 3 Instructions for Use' has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects. ENA 3 IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 8, `Technical data'). Follow the basic safety precautions When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body of machine in water or other liquid. Z Close supervision is necessary when any appliance is used by or near children. [. . . ] 1 CUP, the pre-set amount of water flows into the cup, preparation stops automatically. READY E This setting can be changed at any time by repeating the above procedure. Cappuccino with the Professional Cappuccino Frother Precondition: READY is shown on the display. T Remove the protective cover from the Professional Cappuccino Frother. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. T Set the selector lever of the nozzle to the milk foam p position. en READY Entering a default setting for the amount of water for a cup size E A default setting can be entered for the amount of water for 1 coffee. When preparing 2 coffees this amount is dispensed per cup. en en g T Turn the Rotary Switch until STEAM is displayed. Precondition: READY is shown on the display. The coffee flows into the cup. k T Press the Rotary Switch. HEATING READY appears as soon as the ENA is sufficiently heated. en l T Turn the switch to position m. y T Turn the switch clockwise to position o STEAM, the milk foam is being prepared. when there is sufficient milk foam in the cup. it E You can prepare more milk foam within about 40 seconds. 17 ENA 3 T Place the cup under the coffee spout. Preparation stops automatically. E You can prepare more milk foam within about 40 seconds. 1 CUP, the pre-set amount of water flows T Place the cup under the coffee spout. To ensure that the Easy Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 4 `Rinse ­ Easy Cappuccino Frother'). To ensure that the Professional Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 4 `Rinse ­ Professional Cappuccino Frother'). Cappuccino with the Easy Cappuccino Frother Precondition: READY is shown on the display. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. T Place a cup under the nozzle. Cappuccino with the 2-stage frothing nozzle Precondition: READY is shown on the display. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk. g T Turn the Rotary Switch until STEAM is displayed. k T Press the Rotary Switch. E If the nozzle does not reach into the cup, lift the cup towards the nozzle. sufficiently heated. y T Turn the switch clockwise to position o when there is sufficient milk foam in the cup. HEATING READY appears as soon as the ENA is g T Turn the Rotary Switch until STEAM is displayed. k T Press the Rotary Switch. sufficiently heated. HEATING READY appears as soon as the ENA is STEAM, the milk is foamed by the hot l T Turn the switch to position m. steam. 18 ENA 3 y T Turn the switch to position o when the milk foam has reached the required consistency. E You can prepare more steam within about 40 seconds. k T Press the Rotary Switch. HEATING READY appears as soon as the ENA is sufficiently heated. l T Turn the switch to position m. y T Turn the switch clockwise to position o STEAM, the hot milk is being prepared. when there is sufficient milk in the cup. T Place the cup under the coffee spout. To ensure that the 2-stage frothing nozzle works perfectly, it should be rinsed regularly (refer to Chapter 4 `Rinse ­ Dismantling and rinsing the 2-stage frothing nozzle'). E 1 CUP, the pre-set amount of water flows You can prepare more hot milk within about 40 seconds. To ensure that the Professional Cappuccino Frother works perfectly, it should be rinsed and cleaned regularly (refer to Chapter 4 `Rinse ­ Professional Cappuccino Frother'). en Heating milk with the 2-stage frothing nozzle Precondition: READY is shown on the display. T Place a cup of milk below the 2-stage frothing nozzle and immerse the nozzle in the milk. Heating milk with the Professional Cappuccino Frother Precondition: READY is shown on the display. T Remove the protective cover from the Professional Cappuccino Frother. T Insert the other end of the milk pipe into a milk carton or connect it to a milk container. [. . . ] You cannot prepare any coffee specialities, but you can prepare hot water or steam. You cannot prepare any coffee specialities, but you can prepare hot water or steam. Once 50 litres of water have flowed through the CLARIS filter cartridge, its capacity is reached. Action FILL WATER TANK T Fill the water tank (refer to Chapter 1 `Preparing and using for the first time ­ Filling the water tank'). [. . . ]