User manual JURA IMPRESSA E45

[. . . ] IMPRESSA E40 IMPRESSA E45 IMPRESSA E60 IMPRESSA E65 Instructions for use Art. 5 ­ 19 = Note = Important = Tip Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. juraworld. com Fig. 9 2 1 Operating elements Jura Impressa E40/E45/E60/E65 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Water quantity switch Powder coffee selection switch Coffee key for 2 cups Maintenance key (for functions such as: rinsing, cleaning, de-scaling, filter) Coffee key for 1 cup ON/OFF switch Display with symbols Water tank with carrying handle Height-adjustable coffee spout Pre-ground coffee filler funnel Cover for beam container Selector switch for hot water/steam Pivoting nozzle for hot water/steam Frothing aid Container for coffee grounds Drip tray cover Drip tray 9 8 7 6 5 4 3 2 1 10 11 12 13 14 15 16 17 Contents Jura Impressa E40/E45/E60/E65 1. Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 1. 1 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 2. [. . . ] Immerse the frothing aid (14) into the milk to be frothed or the liquid to be heated and turn the selector switch for hot water/steam (12) to the position. When you have reached the required quantity of steam, turn the selector switch for hot water/steam (12) back to the position . If you would like to draw off a coffee immediately after the steam, please proceed as described in point 8. 1. Draw water off until the flow of water is automatically interrupted and the symbol lights up. After this, turn the selector switch for hot water/steam (12) back to the position. After each steam draw-off, clean the pivoting nozzle with a damp cloth. E 9. Drawing off hot water Place a cup under the pivoting nozzle for hot water/steam (13) and turn the selector switch for hot water/steam (12) to the symbol . To finish the process, turn the selector switch for hot water/ steam (12) back to the position. Please avoid direct contact with the skin. 11 9. 1 Drawing off hot water E45 Install the hot water nozzle to optain perfect water flow. This is included in your Welcome Pack. 11. 3 No drip tray If the properly. Switching machine off When the machine is switched off, the rinsing programme is automatically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch. When the rinsing water has run into the cup, the machine switches off. Throw the rinsing water away. If the drip tray has not been put into the machine, you can clean the interior of the machine. Wipe out any coffee powder that might be in the machine with a damp cloth. Put the drip tray back in again. 11. 4 Clean unit After 200 draw-offs or 160 rinses, the machine must be cleaned; the symbol flashing announces this. We recommend carrying out the cleaning (as described in point 12) within the next few days. Warning lamp does not go out until the complete cleaning prozess has been carried out. 11. Care and maintenance 11. 1 Fill water When the display lights up, no drawing-off is possible. Fill with water as described under point 3. 3. 11. 2 Empty grounds container The grounds container collects the coffee grounds. When this display lights up, no drawing-off is possible and the grounds container must be emptied. The drip tray must also be emptied when you empty the grounds. 11. 5 Unit scaled Scale is caused by using the machine and depends upon the hardness level of your water. [. . . ] Place a sufficiently large vessel under the pivoting nozzle for hot water/steam (13) and press the maintenance key (4). The lighting of the symbol and flashing of the you that the de-scaling process has been activated. symbol show E If the , , symbols light up, empty the drip tray (if necessary) and put it back in again. Turn the selector switch for hot water/steam (12) back to the position . [. . . ]