User manual JURA IMPRESSA J9 QUICK GUIDE

[. . . ] FILTER RINSING, water flows out of the cappuccino frother. c E You can interrupt rinsing of the filter at any time by pressing any button. The filter is activated. Changing the filter E After 50 litres of water have flowed through, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank. 3 IMPRESSA J9 ­ Quick Reference Guide E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. Precondition: COFFEE READY / CHANGE FILTER is displayed and the Maintenance button c lights up. [. . . ] T Use only original JURA maintenance products. E JURA Cappuccino Cleaner is available from stockists. Precondition: COFFEE READY is displayed. k T Press the Rotary Switch to enter the programme item. CLEAN CAPPUCCINO k T Press the Rotary Switch. CLEANER FOR CAPPU. 5 IMPRESSA J9 ­ Quick Reference Guide T Pour 250 ml of fresh water into a receptacle and add one capful (max. T Immerse the milk pipe in the receptacle. E If you are using the Professional Cappuccino Frother, turn the selector switch to the Milk Foam p or Milk t position. CAPPUCCINOCLEANS, the cappuccino frother and the pipe are cleaned. c WATER FOR CAPPUCCINO T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the cappuccino frother again. CAPPUCCINO CLEANS, the cappuccino frother and the pipe are rinsed with fresh water. COFFEE READY appears on the display. c Dismantling and rinsing the Professional Cappuccino Frother T Carefully remove the cappuccino frother from the Connector System© by twisting slightly. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the frother to the Connector System©. 6 IMPRESSA J9 ­ Quick Reference Guide Dismantling and rinsing the Easy Cappuccino Frother T Carefully remove the cappuccino frother from the Connector System© by twisting slightly. T Rinse all parts of the cappuccino frother thoroughly under running water. T Reassemble the cappuccino frother. E Ensure that all individual parts are correctly and firmly connected to ensure correct operation of the cappuccino frother. T Firmly attach the frother to the Connector System©. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E The cleaning programme lasts approximately 20 minutes. The quality of cleaning will be impaired if you do so. E JURA cleaning tablets are available from stockists. Precondition: COFFEE READY / CLEAN MACHINE is displayed and the Maintenance button c lights up. / START YES E If you do not want to start cleaning just yet, turn the Rotary Switch until START NO is displayed. c T Press the Maintenance button. EMPTY TRAY T Empty the drip tray and coffee grounds container and put them back into the machine. PRESS RINSE, the Maintenance button c lights up. 7 IMPRESSA J9 ­ Quick Reference Guide c T Place a receptacle under the coffee spout and another under the cappuccino frother. [. . . ] Precondition: COFFEE READY / DECALCIFY MACHINE is displayed and the Maintenance button c lights up. / START YES E If you do not want to start descaling just yet, turn the Rotary Switch until START NO is displayed. c T Press the Maintenance button. EMPTY TRAY T Empty the drip tray and coffee grounds container and put them back into the machine. SOLVENT IN TANK T Remove and empty the water tank. T Completely dissolve the contents of one blister (three JURA descaling tablets) in a receptacle holding 500 ml of water. [. . . ]