User manual JURA IMPRESSA J9.3 ONE TOUCH TFT QUICK GUIDE

[. . . ] T Turn the setting wheel of the cappuccino frother to the Milk Foam ü or Milk z position. `Milk system is being cleaned. ', water flows out of the cappuccino frother. `Water for cleaning milk system' T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. T Empty the other receptacle and place it under the cappuccino frother again. [. . . ] Set the date on the date plate on the filter holder in the water tank. E If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be prompted to change the filter. `Maintenance status (1/6)' T Press the `Change the filter' button. `Change the filter' E If you do not want to start changing the filter just yet, press the `' button. T Open the filter holder and remove the old CLARIS Blue filter cartridge and filter extension. T Insert the filter cartridge into the water tank, exerting slight pressure. T Fill the water tank with fresh, cold water and reinsert the tank. 5 IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide T Place a receptacle (at least 500 ml) under the cappuccino frother. T Turn the setting wheel of the cappuccino frother to the Steam position n. `Filter is being rinsed. ', water flows out of the cappuccino frother. E You can interrupt rinsing of the filter at any time by pressing any button. `Please select product:' appears on the display. Cleaning the machine CAUTION After 200 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. `Clean' E If you do not want to start cleaning just yet, press the `' button. `Empty coffee grounds container' 6 IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide T Empty the drip tray and coffee grounds container and put them back into the machine. T Place one receptacle under the coffee spout and another under the cappuccino frother. `Machine is being cleaned. ', water flows out of the coffee spout. `Machine is being cleaned. ', water flows repeatedly out of the coffee spout and the cappuccino frother. T Empty the drip tray and coffee grounds container and put them back into the machine. The IMPRESSA is once more ready for use. Descaling the machine The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. If the descaling agent comes into contact with the skin or eyes, this can cause irritation. [. . . ] The operation stops automatically, `Empty drip tray'. 8 J9. 3_Kurz/en/201101 IMPRESSA J9. 3 One Touch TFT ­ Quick Reference Guide T Empty the receptacle under the connector of the cappuccino frother. T Empty the drip tray and coffee grounds container and put them back into the machine. `Fill water tank' T Remove the water tank and rinse it thoroughly. `Please press the Rotary Switch. ' T Refit the cappuccino frother. [. . . ]