User manual JURA IMPRESSA XF70

[. . . ] 65476 4/05 JURA IMPRESSA Legend: DISPLAY: serves as information. JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www. jura. com = Note = Important = Tip Fig. 1 COFFEE symbol 4 11 10 9 2 1 5 6 8 21 22 23 25 12 13 14 6. Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1. 1 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1. 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2. [. . . ] STEAM You can adjust the steam draw-off time individually by turning the rotary switch (1) until the required SEC are displayed. For example, 35 SEC If you do not change the steam draw-off time settings using the rotary switch (1), the machine will use the settings last adjusted During the steam draw-off operation, the message STEAM is displayed When the steam quantity is reached, the message CLOSE TAP is displayed Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP, steam may still escape the system. E 13. Drawing off steam with the Professional-Cappuccino Frother or the Easy-Cappuccino Frother The Professional-Cappuccino Frother and the Easy-Cappuccino Frother are optional. Please contact your authorized dealer. 13 13. 1 Attaching the Professional-Cappuccino Frother or the Easy-Cappuccino Frother to the IMPRESSA Remove either the hot water nozzle (Fig. 5) or the 2-stage frothing jet (Fig. Now attach the Professional-Cappuccino Frother or the EasyCappuccino Frother (Fig. 7). Connect the milk tube with the Professional-Cappuccino Frother or the Easy-Cappuccino Frother (Fig. 9). The separate termal milk container (optional) is ideally suited for drawing in the milk. This is how you connect it to your IMPRESSA (Fig. 8). If the set amount of steam has been reached, the display indicates CLOSE TAP Close the steam / hot water draw-off tap (14). READY 13. 3 Making cappuccino with the Easy-Cappuccino Frother Fill the milk container with milk or dip the milk tube directly into the milk (Fig. Turn the Rotary Switch (1) until the required SEC appear on the display (9). 35 SEC STEAM If the set amount of steam has been reached, the display indicates. READY 13. 2 Making cappuccino and hot milk with the Professional-Cappuccino Frother For cappuccino, turn the selector switch (1) (Fig. 9) to area (2) For hot milk, turn the selector switch (1) (Fig. 9) to area (3) Fill the milk container with milk or dip the milk tube directly into the milk (Fig. Turn the Rotary Switch (1) until the required SEC appear on the display (9). 35 SEC STEAM 13. 4 Cleaning the Professional-Cappuccino Frother and the Easy-Cappuccino Frother After having frothed milk, the Professional-Cappuccino Frother and the Easy-Cappuccino Frother need to be cleaned. 14 Fill water into a container (approx. Place a sufficiently large vessel under the Professional-Cappuccino Frother or the Easy-Cappuccino Frother. Draw steam until the water from the Professional-Cappuccino Frother or the Easy-Cappuccino Frother runs clean. The Professional-Cappuccino Frother and the Easy-Cappuccino Frother are best cleaned using the JURA Auto-Cappuccino cleaner. We recommend cleaning these devices daily. ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ ¼ Maintenance Aroma Temperature Time Automatic switch-on time Automatic switch-off time Draw-offs Language Display Exit To start programming, press the Rotary Switch (1) until FILTER ­ / appears Rotary switch Turn the Rotary Switch to change the adjusted values or to select the next programming step. Press the Rotary Switch to check the values adjusted or to save the values selected (Fig. Switching off the IMPRESSA In order to ensure perfect operation, please don't switch off your IMPRESSA at the power switch (24) before all the symbols on the display (9) have gone off except for (3). READY Switch off the IMPRESSA using the ON/OFF key RINSING An automatic rinsing operation is started. [. . . ] DE-SCALING CLOSE TAP After you have closed the steam / hot water draw off tap (14), the following message is displayed DE-SCALING EMPTY TRAY Empty the tray (Fig. RINSING READY The de-scaling operation was completed successfully. 23 E 18. 1 Decalcifying without display request Decalcifying without display request is only possible if the Claris plus filter is NOT programmed. Now proceed as described in Chapter 18 from EMPTY TRAY onwards. 20. Tips for perfect coffee Height-adjustable coffee spout (17) You can adjust the height of the coffee spout to the size of your cups (Fig. [. . . ]