User manual JVC RX-5022RSL

[. . . ] If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: IMPORTANT. DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code: Blue : Neutral Brown : Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. [. . . ] (with the current setting)* appears on the display. SETTING * ?MID?If you have already changed the setting, another setting will be shown. 2 Press CONTROL UP 5/DOWN ?Each time you press the button, the display changes as follows: OFF MAX MID CONTROL DOWN UP OFF : Select this when you want to enjoy surround with its full dynamic range. (No effect applied. ) MID : Select this when you want to reduce the dynamic range a little. MAX : Select this when you want to apply the compression effect fully. (Useful at night. ) 14 EN08-20. RX-5022RSL[B]_f 14 02. 1. 16, 5:33 PM Sound Adjustments Front Panel Display TEST Remote Control A/V CONTROL RECEIVER CENTER STANDBY/ON AUDIO 1 EFFECT 2 5 8 0 SOUND 3 REAR L TV 4 MENU 6 REAR R VCR RX-5022R AUDIO/VIDEO CONTROL RECEIVER FM/AM TUNING UP STANDBY FM/AM PRESET UP FM MODE DIMMER PTY SEARCH TA/NEWS/INFO DISPLAY MODE SUBWOOFER +/?SOUND 7/P ENTER 9 DVD SUBWOOFER 10 RETURN 10 SLEEP TA/NEWS/INFO 100 MEMORY DOWN DOWN ANALOG DIGITAL AUTO LINEAR PCM DIGITAL SPK L C R S. WFR LFE LS S RS TUNED STEREO PRO LOGIC ??DSP H. PHONE INPUT ATT AUTO MUTING SLEEP RDS TA NEWS INFO VOLUME MASTER VOLUME PTY?PTY SEARCH?PTY REW REC PAUSE DISPLAY MODE FF CD?DISC STANDBY/ON CH- DVD SURROUND ON/OFF INPUT ANALOG INPUT DIGITAL VCR TV SOUND ADJUST SETTING TAPE/CDR CD DVD ANALOG /DIGITAL FM/AM INPUT ATT TV SOUND VCR CD SURROUND MODE SPEAKERS ON/OFF TAPE/CDR FM/AM CONTROL DOWN UP FM MODE ON/OFF DIMMER TV/VIDEO SURROUND MODE MUTING SOURCE NAME PHONES VCR CH TV CH TV VOLUME VOLUME REMOTE CONTROL RM - SRX5022R INPUT ATT ADJUST CONTROL UP 5/DOWN ? Once each of following settings has been adjusted, this receiver memorizes the adjustment for each source. 1 Attenuating the Input Signal Remote NOT Press ADJUST repeatedly until ?BASS?(with the current setting)* appears on the display. ADJUST SETTIN When the input level of the analog source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion. * ?0?If you have already changed the setting, another number (level) will be shown. BASS : To adjust the bass (?10 to +10). TREBLE : To adjust the treble (?10 to +10). 1 Press and hold INPUT ATT (INPUT ANALOG) so that the INPUT ATT indicator lights up on the display. INPUT ANALOG INPUT ATT 2 Press CONTROL UP 5/DOWN ?You can store the FM reception mode for each preset station (see page 16). The selected channel number stops flashing. The station is assigned to the selected channel number. ANALOG SPK L C R S. WFR LFE LS S RS TUNED STEREO AUTO MUTING VOLUME CH- 1 While listening to an FM station, press FM MODE. ?Each time you press the button, the FM reception mode alternates between ?AUTO?and ?MONO. ? FM MODE 5 Repeat steps 1 to 4 until you store all the stations you want. FM MODE To erase a stored preset station Storing a new station on a used number erases the previously stored one. On the front panel From the remote control To tune in a preset station On the front panel: ANALOG SPK L C R S. WFR LFE LS S RS TUNED STEREO AUTO MUTING CH- 1 Press FM/AM to select the band (FM or AM?MW/LW). The last received station of the selected band is tuned in. Each time you press the button, the band alternates between FM and AM (MW/LW). ANALOG SPK L C R S. WFR LFE LS S RS FM/AM ANALOG SPK L C R S. WFR LFE LS S RS TUNED CH- TUNED STEREO AUTO MUTING VOLUME AUTO CH- 2 Press FM/AM PRESET UP/ DOWN until you find the channel you want. ?Pressing FM/AM PRESET DOWN decreases the channel numbers. FM/AM PRESET UP DOWN : Normally select this. When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. (Initial setting) : Select this to improve the reception (but stereo effect will be lost). (The STEREO indicator also goes off. ) MONO From the remote control: 1 Press FM/AM to select the band (FM or AM?MW/LW). The last received station of the selected band is tuned in and the 10 keys now work for tuner operation. Each time you press the button, the band alternates between FM and AM (MW/LW). FM/AM To restore the stereo effect Select ?AUTO? [. . . ] See page 8. 29 EN27-32. RX-5022RSL[B]_f 29 02. 1. 16, 5:34 PM Operating Video Components IMPORTANT: To operate JVC?s video components using this remote control: ?Before using this remote control, make sure that the remote control code of the VCR connected to the VCR jacks is set to code ?A. ?Aim the remote control directly at the remote sensor on each component, not on the receiver. DVD menu operations After pressing DVD (source selecting button), you can use the following buttons for DVD menu operations: TEST CENTER Operating JVC's Audio/ Video Components 1 EFFECT 2 5 8 0 3 REAR L 4 MENU 6 REAR R 7/P ENTER 9 10 100 SUBWOOFER 10 RETURN MENU 5/?/3/2 ?32 ENTER : Display or erase the menu screen. : Enter a selected item. VCR You can always perform the following operations: STANDBY/ON VCR CH +/? [. . . ]