User manual KRESS 300 RSE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KRESS 300 RSE. We hope that this KRESS 300 RSE user guide will be useful to you.


KRESS 300 RSE : Download the complete user guide (10246 Ko)

You may also download the following manuals related to this product:

   KRESS 300 RSE (680 ko)
   KRESS 300 RSE (680 ko)
   KRESS 300 RSE ANNEXE 18 (886 ko)
   KRESS 300 RSE ANNEXE 801 (886 ko)
   KRESS 300 RSE ANNEXE 485 (886 ko)
   KRESS 300 RSE ANNEXE 300 (886 ko)

Manual abstract: user guide KRESS 300 RSE

Detailed instructions for use are in the User's Guide.

[. . . ] Position 1 = low speed Position 2 = high speed 2-speed gearing gives the percussion drill added versatility. 1st speed 2 nd speed 1st speed 2 nd speed Use This drill is universally suitable for percussion drilling in rock, for drilling and as a screwdriver with wood, metal and plastic and for cutting threads. You should use 1st gear of the mechanical drive when using the device for stirring and drilling holes with large diameters. Safety instructions and prevention of accidents Before operating the machine, please read through the operating instructions completely, follow the Safety Instructions in this manual as well as the general Safety Instructions for Power Tools in the accompanying booklet. [. . . ] G Outside power sockets must be protected with residual-current-operated circuit-breakers (r. Double Insulation Our equipment is designed in accordance with European regulations (EN standards) for the utmost safety of the user. Machines with double insulation always carry the international symbol. The safety slippling clutch The slipping clutch begins to operate as soon as the drill or the tool being driven is overloaded, violently braked or jammed. the motor and transmission continue to rotate , but the tool is no longer driven. This protects the driveline against overloads and avoids damage to the gear teeth caused by violent shocks. Only this guarantees that the chuck is not unintentionally unwound from the drill spindle in anticlockwise mode. Should the chuck be undone from the drill spindle for the purpose of replacement, the new chuck must be tightened with a turning moment of at least 30 Nm before the machine is used again. The plane surfaces of the chuck and drill spindle must be cleaned before a new chuck is mounted. Before disassembling and reassembling the drill chuck, disconnect the machine from the power supply, or remove the mains cable module (6) from the grip using the locking device button (7). Replacing carbon brushes Our service personnel will do this and all other servicing work fast and professionally. Thanks to the innovative mains cable with patent quickrelease lock (6) it is possible for you to replace the cable with the greatest of ease. Press the two lock pushbuttons (7) and pull the mains cable out of the casing (6). Auxiliary handle For safety reasons the side handle should always be used when working with the percussion drill. It guarantees safe, wander-free guidance of the drill, and at the same time precise adjustment of the drilling depth with the depth stop. This is the only way to ensure that the auxiliary handle cannot turn on the collar or come off the appliance. Standard accessories Side handle with depth stop Noise/vibration information Measured values correspond with EN 50144. Sound pressure level: 300 RSE = 78+3 dB (A) Sound power level: 300 RSE = 91+3 dB (A) Work place emission value: 300 RSE = 81+3 dB (A) Operators require noise protection equipment. We reserve the right to make alterations resulting from technical development without prior notice. environmental protection Kress takes back used machines for resource saving recycling. [. . . ] Due to their modular construction Kress machines can be very easily broken down into their recyclable basic materials. Hand in your old Kress machine at a dealer or send them directly to Kress. Consignes de sécurité et prévention des accidents Avant de mettre la machine en marche, il convient de lire entièrement la notice d'utilisation et d'observer les consignes de sécurité données dans cette notice ainsi que les consignes de sécurité générales relatives aux outils électriques précisées dans la brochure ci-jointe. Lämna in utgallrade Kress-maskiner till affären eller skicka tillbaka dem till Kress. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KRESS 300 RSE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KRESS 300 RSE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.