User manual KRESS 600 PSE

[. . . ] Wear protective glasses, hearing protection, protective gloves and sturdy shoes. The mains receptacles in the working area must be protected by a residual current circuit breaker (RC). For the attachment of identification markings on the machine, do not drill into the housing. Therefore, always take a secure stance and hold the machine firmly with both hands. [. . . ] Check before putting into operation that the mains voltage agrees with the voltage specified on the nameplate of the machine. ROTATION STOP With the rotation stop switch 4, two settings can be selected. Only after the on/off switch 6 is actuated and the machine starts does the gear box shift to the selected mode. Only after the on/off switch 6 is actuated and the machine starts does the gear box shift to the selected mode. INSERTING TOOLS Before any work on the machine itself, pull the mains plug!The chisel can now be turned by hand to the required working position. The chisel latches automatically as soon as it is radially loaded by the working or chiselling process. IMPACT DRILLING - CHISELING Wear protective glasses and hearing protection. The most effective method for chiselling is to break out only small pieces of material. When chiselling, work only with protective glasses and the auxiliary handle 12. Check before starting to work if the rotation stop switch 4 is engaged in the position. SCREWDRIVING Screwdriver bits can be inserted into the adapter 13 (accessory). For drilling work in metal, wood and plastic with drills that have normal shafts, a drill chuck (13 mm max. All common drill chucks with 1/2" x 20 UNF internal threads (13 mm max. MOUNTING THE CHUCK Before any work on the machine itself, pull the mains plug! clean the threads of the drill chuck (accessory) and the adapter 13 (accessory). Screw the drill chuck onto the adapter and lock the adapter in the same manner as a drill in the tool holder. Remove the load from the machine immediately by pulling back the drill. Always hold the machine firmly with both hands and take a secure stance. Check the area to be worked with a metal detector, for example, before starting. [. . . ] Improper use or handling as well as opening of the machine by unauthorised repair agencies voids the guarantee. The guarantee may only be enforced when defects are reported without undue delay (including shipping damage). If the tool is defective, please complete the guarantee card and return the unit, guarantee card and a brief description of the problem to the responsible service location. The guarantee obligations assumed by us shall exclude any further claims on the part of the buyer, in particular the right to recission of a sale, reduction and the assertion of damage claims. [. . . ]